Details
Isothermal Bomb Caloriemeter
Our product are designed as per guidelines of various IP, BP, IS, BIS and ASTM standards as per customer specifications of test and use. Our Bomb Calorimeters are being used in various IITs, Thapar Institute, Ambuja Cement, Adhunik Cement.
Isothermal Bomb Calorimeters Advance makes a wide range of Isothermal Bomb Calorimeters with several unique and user friendly features. These while ensuring ease of use also maintain high accuracy and result repeatability. While maintaining the Isothermal Operating Principle the temperature accuracy has been raised from 0.01oC to 0.001oC which gives a much higher accuracy in results. Model BCM-PC can be interfaced to a computer for Auto Operation and Calculations. The user has a choice of either the standard schrader Valve based Combustion Bomb or our latest design of Schrader Valve less Combustion Bomb design.
Key Features
-
Bomb Body and Lid are fabricated from Corrosion Resistant Stainless Steel Alloy.
-
Extremely Easy to use Push Fit Type Gas Filling System.
-
Each Combustion Bomb tested at a pressure of 300 kg/cm2 for 10 minutes as per IP guidelines.
-
Calorimeter Jacket and Water Jacket fabricated from Chromium plated copper.
-
Safety Relief Valve for user safety.
-
New Soft Control Fine Regulating Valve with built-in pressure gauge.
-
Latest Design Compact Stirrer to minimize external heating effect.
-
New High Accuracy Digital Temperature Indicator with built-in printer.
-
High Mechanical standards and easy controls.
-
Accurate, Reliable and User Friendly.
Technical Specifications*
Model |
LSBCM-P |
Operational Principle |
Isothermal |
Fundamental Standards |
BIS-1350 (Part-2), IP-12/63T |
Inner Vessel |
Electroplated Copper |
Outer Jacket |
Electroplated Copper & water Filled/Puff Insulation (Optional) |
Bomb Design |
schrader Valve |
Bomb & Bucket |
Removable |
Oxygen Filling |
Manual |
Sensor |
Single Sensor |
Temperature Accuracy |
0.01°C |
R.S.D |
1% with Benzoic Acid |
Range |
1000-12000 Cal/g |
Display |
Digital Temperature with Time |
Printer Facility (Temp Vs Time) |
Available |
Stirrer |
Compact 12V DC |
Bomb Firing |
Manual |
Calculation |
Manual |
Testing Time |
25-30 Minutes |
Operating Temperature |
15-30°C |
Power Input |
<1.0KW |
Power Requirement |
230V+10V, 50 Hz |
Note: Due to process of continuous improvements, specifications are subject to change without prior notice
Accessories
-
Combustion Bomb (Standard)
-
Combustion Bomb (Halogen Resistant)
-
Crucible (Stainless Steel)
-
Crucible (Quartz)
-
Crucible (Platinum)
-
Ignition Wire - Standard (100 pc pack)
-
Ignition Wire (Platinum)
-
Electrode Set
-
Schrader Valve
-
Sensor
-
Strirrer
-
Bomb Lid Stand
-
Connecting Lead
-
Main Gas Filling Valve Assembly.
-
Cotton Thread.
-
Gasket Ring for combustion Bomb.
-
Gasket Ring Set for Adaptor.
-
Standard Benzoic Acid Pellets.
-
Benzoic Acid Powder
-
Standard Coal Sample.
-
Fine Regulating Valve with Built in Pressure Gauge
-
Pressure Gauges.
-
S S Braided Ptfe Tube with Adaptor
-
Printer Cartage
-
Printer Paper Roll
-
Spare Printer
-
Digital Temperature Indicator w/o Printer
-
Digital Temperature Indicator with Printer
-
Fuse
-
Printer Stand