jainsonsindia partners
 Enquiry Cart

Isothermal Bomb Calorimeter

More Views

Isothermal Bomb Calorimeter

Code:
Isothermal Bomb Calorimeter 
 
The integration of a Computer in the Isothermal Bomb Calorimeter along with several other unique and user friendly features makes the BCM-PC model extremely ease of use while maintaining high accuracy and result repeatability. The temperature accuracy has also been increased from 0.01°C available in the standard models to 0.001°C in the new BCM-PC. The USB port is easy to use and does not require any additional Serial to USB devices.
 
Key Features
Easy to use USB Communication based interface between Computer and Firing Unit Automatic Control of Firing, Stabilization and End of Experiment. Results are calculated automatically after end of experiment.

Results can be transferred to excel for further viewing and analysis

The user has a choice of either the standard Schrader Valve based Combustion Bomb or our latest design of Schrader Valve free Combustion Bomb design. This is additionally provided with a Automatic Gas Filling Adaptor which simplifies the Oxygen filling procedure. The valve opens and allows filling of Bomb with Oxygen because of Oxygen pressure for cylinder. It closes when pressure from Oxygen Cylinder is cut off.

Our latest design of easy to use Gas Filling System greatly reduces of damage to the costly Gas Filling Tubes with our latest design of Stainless Steel braided PTFE Hose. Our tests have indicated that this new Gas Filling System reduces the time taken for Oxygen charging from around 10-13 minutes (using the copper tube) to less than 3 minutes (using the new Gas Filling System) while simultaneously avoiding chances of cross-threading & subsequent damage to the Gas Filling System.

Each Advance Calorimeter Bomb is tested thoroughly before it leaves the factory at internal pressure of 300kg/cm2 for a period of 10 minutes without any sign of leakage in accordance with requirements of the Institute of Petroleum (I.P. 12/58T, Appendix I), IS:1350 (Part-II) 1970 and works Test certificate issued with each Bomb.
  • Each batch of material used for Advance Calorimeter Bomb is put through a series of physical and chemical tests to verify the prescribed standards for fabrication of a high pressure vessel. This ensures the highest standards of customer safety.
  • The Bomb Body and Lid are machined from corrosion resistant Stainless Steel namely Austenitic Steel satisfying the special ringing and bend tests for inter-crystalline corrosion and having good high temperature properties. The interior of the Bomb has been maintained cylindrical throughout its length. The metal seal between the body and the lid is backed by a sealing ring. The Closure Ring is made of Aluminium Bronze or Stainless Steel and hand tightening of the Closure Ring is sufficient to ensure perfect gas tight sealing at a pressure of 300 kg/cm2.
  • Extremely Easy to use Push Fit Type Gas Filling System for fast and accurate filling of Oxygen
  • Each Combustion Bomb is individually tested at a pressure of 300 kg/cm2 for a period of 10 minutes for signs of any leakage as per IP guidelines
  • Calorimeter Jacket and Water Jacket fabricated from Chromium plated Copper as per International specifications
  • The introduction of a Safety Relief Valve in the Gas Filling Adaptor ensures additional user safety from accidental Oxygen overfill.
  • New Soft Control Fine Regulating Valve with built-in pressure gauge ensures fatigue free operation of the system
  • Latest Design Compact Stirrer to minimize external heating effect
  • The new High Accuracy Digital Temperature Indicator with built-in printer has an additional stabilizing circuit which ensuring that readings have high accuracy and repeatability
  • High Mechanical standards and easy controls
  • The instrument is Accurate, Reliable and User Friendly.
 
Technical Specifications*
Model LSBCM-PC
Operational Principle Isothermal
Fundamental Standards BIS-1350 (Part-2), IP-12/63T
Inner Vessel Electroplated Copper
Outer Jacket Electroplated Copper & water Filled
Bomb Design Either Schrader Valve or Pin Valve Design
Bomb & Bucket Removable
Oxygen Filling Automatic
Oxygen Filling Time <1 Minutes
Pressure Regulator Automatic
Sensor Dual Sensor
Temperature Resolution 0.001°C (Main Sensor)
R.S.D 1% with Benzoic Acid
Range Upto 12000 Cal/g
Temperature Display Either on Digital Indicator or Computer
Temperature Stability Auto & Manual
Stirrer Compact 12V DC
Bomb Firing Auto & Manual
Printer Facility (Temp Vs Time) Via Computer
Temp Vs Time Graph Available
Calculation Automatic
Memory Available
Testing Time 15-20 Minutes
Operating Temperature 15-30°C
Computer Connectivity Available
USB Port Available
Power Input <1.0KW
Power Requirement 230V+10V, 50 Hz
Note: Due to process of continuous improvements, specifications are subject to change without prior notice
 
Accessories
  • Combustion Bomb (Standard)
  • Combustion Bomb (Halogen Resistant)
  • Crucible (Stainless Steel)
  • Crucible (Quartz)
  • Crucible (Platinum)
  • Ignition Wire - Standard (100 pc pack)
  • Ignition Wire (Platinum)
  • Electrode Set
  • Sensor 0.01
  • Sensor 0.001
  • Stirrer 12V
  • Schrader Valve.
  • Pin Valve Assembly
  • Main Gas Filling Valve Assembly.
  • Cotton Thread.
  • Gasket Ring for Combustion Bomb.
  • Gasket Ring Set for Adaptor.
  • Standard Benzoic Acid Pellets.
  • Benzoic Acid Powder
  • Standard Coal Sample.
  • Auto Gas Regulator.
  • Auto Gas Filling Adaptor
  • Oxygen Filling Pipe
  • Pressure Gauges.
  • Fuse
 
 
Description

Details

Isothermal Bomb Calorimeter 
 
The integration of a Computer in the Isothermal Bomb Calorimeter along with several other unique and user friendly features makes the BCM-PC model extremely ease of use while maintaining high accuracy and result repeatability. The temperature accuracy has also been increased from 0.01°C available in the standard models to 0.001°C in the new BCM-PC. The USB port is easy to use and does not require any additional Serial to USB devices.
 
Key Features
Easy to use USB Communication based interface between Computer and Firing Unit Automatic Control of Firing, Stabilization and End of Experiment. Results are calculated automatically after end of experiment.

Results can be transferred to excel for further viewing and analysis

The user has a choice of either the standard Schrader Valve based Combustion Bomb or our latest design of Schrader Valve free Combustion Bomb design. This is additionally provided with a Automatic Gas Filling Adaptor which simplifies the Oxygen filling procedure. The valve opens and allows filling of Bomb with Oxygen because of Oxygen pressure for cylinder. It closes when pressure from Oxygen Cylinder is cut off.

Our latest design of easy to use Gas Filling System greatly reduces of damage to the costly Gas Filling Tubes with our latest design of Stainless Steel braided PTFE Hose. Our tests have indicated that this new Gas Filling System reduces the time taken for Oxygen charging from around 10-13 minutes (using the copper tube) to less than 3 minutes (using the new Gas Filling System) while simultaneously avoiding chances of cross-threading & subsequent damage to the Gas Filling System.

Each Advance Calorimeter Bomb is tested thoroughly before it leaves the factory at internal pressure of 300kg/cm2 for a period of 10 minutes without any sign of leakage in accordance with requirements of the Institute of Petroleum (I.P. 12/58T, Appendix I), IS:1350 (Part-II) 1970 and works Test certificate issued with each Bomb.
  • Each batch of material used for Advance Calorimeter Bomb is put through a series of physical and chemical tests to verify the prescribed standards for fabrication of a high pressure vessel. This ensures the highest standards of customer safety.
  • The Bomb Body and Lid are machined from corrosion resistant Stainless Steel namely Austenitic Steel satisfying the special ringing and bend tests for inter-crystalline corrosion and having good high temperature properties. The interior of the Bomb has been maintained cylindrical throughout its length. The metal seal between the body and the lid is backed by a sealing ring. The Closure Ring is made of Aluminium Bronze or Stainless Steel and hand tightening of the Closure Ring is sufficient to ensure perfect gas tight sealing at a pressure of 300 kg/cm2.
  • Extremely Easy to use Push Fit Type Gas Filling System for fast and accurate filling of Oxygen
  • Each Combustion Bomb is individually tested at a pressure of 300 kg/cm2 for a period of 10 minutes for signs of any leakage as per IP guidelines
  • Calorimeter Jacket and Water Jacket fabricated from Chromium plated Copper as per International specifications
  • The introduction of a Safety Relief Valve in the Gas Filling Adaptor ensures additional user safety from accidental Oxygen overfill.
  • New Soft Control Fine Regulating Valve with built-in pressure gauge ensures fatigue free operation of the system
  • Latest Design Compact Stirrer to minimize external heating effect
  • The new High Accuracy Digital Temperature Indicator with built-in printer has an additional stabilizing circuit which ensuring that readings have high accuracy and repeatability
  • High Mechanical standards and easy controls
  • The instrument is Accurate, Reliable and User Friendly.
 
Technical Specifications*
Model LSBCM-PC
Operational Principle Isothermal
Fundamental Standards BIS-1350 (Part-2), IP-12/63T
Inner Vessel Electroplated Copper
Outer Jacket Electroplated Copper & water Filled
Bomb Design Either Schrader Valve or Pin Valve Design
Bomb & Bucket Removable
Oxygen Filling Automatic
Oxygen Filling Time <1 Minutes
Pressure Regulator Automatic
Sensor Dual Sensor
Temperature Resolution 0.001°C (Main Sensor)
R.S.D 1% with Benzoic Acid
Range Upto 12000 Cal/g
Temperature Display Either on Digital Indicator or Computer
Temperature Stability Auto & Manual
Stirrer Compact 12V DC
Bomb Firing Auto & Manual
Printer Facility (Temp Vs Time) Via Computer
Temp Vs Time Graph Available
Calculation Automatic
Memory Available
Testing Time 15-20 Minutes
Operating Temperature 15-30°C
Computer Connectivity Available
USB Port Available
Power Input <1.0KW
Power Requirement 230V+10V, 50 Hz
Note: Due to process of continuous improvements, specifications are subject to change without prior notice
 
Accessories
  • Combustion Bomb (Standard)
  • Combustion Bomb (Halogen Resistant)
  • Crucible (Stainless Steel)
  • Crucible (Quartz)
  • Crucible (Platinum)
  • Ignition Wire - Standard (100 pc pack)
  • Ignition Wire (Platinum)
  • Electrode Set
  • Sensor 0.01
  • Sensor 0.001
  • Stirrer 12V
  • Schrader Valve.
  • Pin Valve Assembly
  • Main Gas Filling Valve Assembly.
  • Cotton Thread.
  • Gasket Ring for Combustion Bomb.
  • Gasket Ring Set for Adaptor.
  • Standard Benzoic Acid Pellets.
  • Benzoic Acid Powder
  • Standard Coal Sample.
  • Auto Gas Regulator.
  • Auto Gas Filling Adaptor
  • Oxygen Filling Pipe
  • Pressure Gauges.
  • Fuse
 
 
Additional Information

Additional Information

Code No
Reviews

Fatal error: Uncaught Exception: Warning: Unknown: write failed: Disk quota exceeded (122) in Unknown on line 0 in /home2/jainsonsindia/public_html/app/code/core/Mage/Core/functions.php:245 Stack trace: #0 [internal function]: mageCoreErrorHandler(2, 'Unknown: write ...', 'Unknown', 0, NULL) #1 {main} thrown in /home2/jainsonsindia/public_html/app/code/core/Mage/Core/functions.php on line 245