Details
Cryogenic Test Chamber (Upright-Combination type)
OPERON -165°C Cryogenic Test Chamber - LSCTC-165 Cryogenic Test Chamber of OPERON is the cryogenic cooling device to test the strength of materials for an LNG carrier between -165°C to -10°C. It is a creative product of OPERON. Previously in the most advanced countries, cryogenic test is available with continuous injection of liquid nitrogen connected to the tank lorry,
but electronic concentrator operating method of OPERON Co., Ltd cryogenic cooling technology realizes -165°C, so the sample test can be performed with below half of cost
comparing to the method using liquid nitrogen for a long time. Also, if the user wants rapid cooling, using it with liquid nitrogen method satisfies both quick freezing and low cost.
It is also used to test tensile strength or degree of fatigue of metals. There are two types of chambers, combination type with flexible fitting which makes it move up & down and back & forth and chest type all-in-one freezer chamber.
Model |
LSCTC-165 |
LSCTC-150 |
LSCTC-130 |
Items |
Description |
Description |
Description |
Overall (Engine) |
Min. Temperature |
-165 °C |
-150 °C |
-130 °C |
Operating temperature |
-20 ~ -165 °C |
-20 ~ -150 °C |
-20 ~ -130 °C |
Dimension |
W1000 x D900 x H1750 |
Compressor |
7.5HP ~ 5HP x 2Set(Semi hermetic compressors) |
Refrigeration system |
Two stage auto cascade system |
Condenser |
Air cold condenser |
Refrigerants |
CFC-free mixed refrigerants |
Caster |
4EA of Heavy duty wheel-swivel casters(Put master 4") |
Power requirement |
380V 3Ph, 12Kw |
Chamber |
Dimension |
(ln)W356 x D356 x H660 |
(Out)W616 x D866 x H990 |
Circulation fan motor |
100W |
Heater Capacity |
1000W |
Temperature control system |
PC Monitoring & Controlling |
Temperature Acuracy |
+/-0.5 °C |
Sensor |
PT-I00(0ne for chamber, One for Sample) |
Sensor port |
36mm of hole |
Insulation |
150mm of High density urethane foam |
Inside light |
Halogen lamp |
Viewing port |
Triple tempered glass(T 10mm d 130mm) |
Cylinder sealing |
Special made housing seal |
Rim-heating |
Silicone rubber heater |
Door packing |
Special made packing |
Drain hole |
built-in |
Caster |
3" |
Stabilizer |
built-in |
Power requirement |
220V/1Ph , 1.5Kw |
Control system |
PC Monitoring & Controlling |
Temperature control unit - 1set |
RS-232 cable - 1 set |
Software Program CD - 1set |