jainsonsindia partners
 Enquiry Cart

HEAT TRANSFER IN AGITATED VESSEL

More Views

HEAT TRANSFER IN AGITATED VESSEL

Code:
DESCRIPTION:
In most industrial processes including reactors, heat is to be added or extracted to control the process. The addition and removal of heat is done by passing steam or water in a jacket fitted to the outside of the vessel or passing steam or cold water in helical coil inside the vessel. For effective heat transfer and even distribution of heat, the liquid inside is continuously agitated. The present set-up offers us a comparative study of Jacket & Helical coil, which can be operated simultaneously. It is a stainless steel jacketed vessel with helical coil of copper is fitted inside. A variable speed stirrer is fitted in the vessel. Variation in temperature of inside water is measured and is noted. Set-up is fitted with steam traps for condensate collection. Flow rate of water can be controlled and measured using valve and Rotameter. Temperature of inlet and outlet of both hot & cold fluids are measured by temperature sensors.

E
XPERIMENTATION:
  • To determine the overall heat transfer co-efficient for various degree of agitation.
  • To make a comparative study of Heat Transfer through Jacket & Coil in an agitated vessel. 
UTILITIES REQUIRED:
  • Water supply 20 lit/min (approx.)
  • Floor Drain.
  • Electricity Supply: 1 Phase, 220 V AC, 5 kW.
  • Floor area: 1.5m x 1.5m. 
TECHNICAL DETAILS:
System Steam to Water
Vessel Material stainless steel fitted with 4 baffles Dia. 250, Depth 350 mm (Approx.)
Jacket Width 25 mm. Insulated with ceramic wool and cladded with aluminum foil.
Helical Coil Material Copper, OD 16mm, ID 13mm.
Agitator Stainless steel Impeller fitted on a shaft coupled to a variable speed motor and Drive.
Water Flow Measurement Rotameter.
Steam Generator Material stainless steel fitted with level indicator, pressure Gauge, safety valve, drain and insulated with ceramic wool & cladding with Aluminium foil.
Heaters Nichrome wire heater (2 Nos.)
Condensate Measurement Measuring Cylinder & Stopwatch
Control panel comprising of
Digital Temp. Controller 0-199.9°C (For Steam Generator)
 Digital Temp. Indicator  0-199.9°C, with multi-channel switch
Temperature Sensors RTD PT-100 type-5Nos.
RPM Indicator Standard make Digital, Non Contact type.
With standard make On/Off switch, Mains Indicator etc.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.
 
Ordering Details:
Catalogue No Description
JIHT-005 HEAT TRANSFER IN AGITATED VESSEL
 
Description

Details

DESCRIPTION:
In most industrial processes including reactors, heat is to be added or extracted to control the process. The addition and removal of heat is done by passing steam or water in a jacket fitted to the outside of the vessel or passing steam or cold water in helical coil inside the vessel. For effective heat transfer and even distribution of heat, the liquid inside is continuously agitated. The present set-up offers us a comparative study of Jacket & Helical coil, which can be operated simultaneously. It is a stainless steel jacketed vessel with helical coil of copper is fitted inside. A variable speed stirrer is fitted in the vessel. Variation in temperature of inside water is measured and is noted. Set-up is fitted with steam traps for condensate collection. Flow rate of water can be controlled and measured using valve and Rotameter. Temperature of inlet and outlet of both hot & cold fluids are measured by temperature sensors.

E
XPERIMENTATION:
  • To determine the overall heat transfer co-efficient for various degree of agitation.
  • To make a comparative study of Heat Transfer through Jacket & Coil in an agitated vessel. 
UTILITIES REQUIRED:
  • Water supply 20 lit/min (approx.)
  • Floor Drain.
  • Electricity Supply: 1 Phase, 220 V AC, 5 kW.
  • Floor area: 1.5m x 1.5m. 
TECHNICAL DETAILS:
System Steam to Water
Vessel Material stainless steel fitted with 4 baffles Dia. 250, Depth 350 mm (Approx.)
Jacket Width 25 mm. Insulated with ceramic wool and cladded with aluminum foil.
Helical Coil Material Copper, OD 16mm, ID 13mm.
Agitator Stainless steel Impeller fitted on a shaft coupled to a variable speed motor and Drive.
Water Flow Measurement Rotameter.
Steam Generator Material stainless steel fitted with level indicator, pressure Gauge, safety valve, drain and insulated with ceramic wool & cladding with Aluminium foil.
Heaters Nichrome wire heater (2 Nos.)
Condensate Measurement Measuring Cylinder & Stopwatch
Control panel comprising of
Digital Temp. Controller 0-199.9°C (For Steam Generator)
 Digital Temp. Indicator  0-199.9°C, with multi-channel switch
Temperature Sensors RTD PT-100 type-5Nos.
RPM Indicator Standard make Digital, Non Contact type.
With standard make On/Off switch, Mains Indicator etc.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.
 
Ordering Details:
Catalogue No Description
JIHT-005 HEAT TRANSFER IN AGITATED VESSEL
 
Additional Information

Additional Information

Code No
Reviews