jainsonsindia partners
 Enquiry Cart

TWO PHASE HEAT TRANSFER UNIT

Code:
DESCRIPTION :
The Unit consists of a strong cylinder containing fluid. A water cooled coil in the upper part of the cylinder condenses the vapour and returns it to the boiling liquid. The condenser cooling water rate can be measured and controlled also.
 
EXPERIMENTATION:
  • To plot graph of heat flux & temperature difference between metal & liquid
  • To calculate amount heat taken away by water from condensing vapours. 
UTILITIES REQUIRED :
  •  Electricity Supply: 1 Phase, 220 V AC, 2 Amp.
  •  Water supply: 2lt/min
  •  Floor Drain
  •  Floor area: 1.0m x 0.75 m 
TECHNICAL DETAILS :
Boiling/Condensation
 Cylinder
300mm x 75mm O.D. approximately fitted withsealed caps 
with pressure gauge and relief valve.
Pressure gauge Bourdan type, (0 to 2) kg/cm²
 Water Flow Measurement  Rotameter, (10 – 100) LPH
Temperature Sensor RTD PT-100 type
Control panel comprising of
Voltmeter 0-200 V
Ammeter 0-2 Amp
Digital Temp. Indicator 0-199.9oC, with multi-channel switch,
Dimmerstat 0-4 A, 230 V
With standard make On/Off switch, Mains Indicator etc.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Ordering Details:
Catalogue No Description
JIHT-022 TWO PHASE HEAT TRANSFER UNIT
 
 
 
 
Description

Details

DESCRIPTION :
The Unit consists of a strong cylinder containing fluid. A water cooled coil in the upper part of the cylinder condenses the vapour and returns it to the boiling liquid. The condenser cooling water rate can be measured and controlled also.
 
EXPERIMENTATION:
  • To plot graph of heat flux & temperature difference between metal & liquid
  • To calculate amount heat taken away by water from condensing vapours. 
UTILITIES REQUIRED :
  •  Electricity Supply: 1 Phase, 220 V AC, 2 Amp.
  •  Water supply: 2lt/min
  •  Floor Drain
  •  Floor area: 1.0m x 0.75 m 
TECHNICAL DETAILS :
Boiling/Condensation
 Cylinder
300mm x 75mm O.D. approximately fitted withsealed caps 
with pressure gauge and relief valve.
Pressure gauge Bourdan type, (0 to 2) kg/cm²
 Water Flow Measurement  Rotameter, (10 – 100) LPH
Temperature Sensor RTD PT-100 type
Control panel comprising of
Voltmeter 0-200 V
Ammeter 0-2 Amp
Digital Temp. Indicator 0-199.9oC, with multi-channel switch,
Dimmerstat 0-4 A, 230 V
With standard make On/Off switch, Mains Indicator etc.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Ordering Details:
Catalogue No Description
JIHT-022 TWO PHASE HEAT TRANSFER UNIT
 
 
 
 
Additional Information

Additional Information

Code No
Reviews