Labo Still-Boro-4S/D (Water Distillation Unit)
Technical Specifications:
|
Output
|
4 ltrs./hr.
|
|
Distilled Water Quality
|
|
|
pH
|
5.5 – 6.0
|
|
Conductivity
|
1.0 – 2.0 µS/cm.
|
|
Distillate quality
|
Pyrogen free.
|
|
Electrical Power
|
220/240V, 50/60 Hz Single Phase,
3 KW Silica Heater
|
|
Cooling water requirement
|
1.5 ltrs./min.
|
|
Minimum Pressure
|
3 p.s.i.
|
|
Dimensions (W x D x L)
|
600 x 185 x 480 (mm.)
|
|
Weight
|
8 Kgs. (Approx.)
|
Note: Distilled water conductivity and PH will be greatly affected by the temperature and the presence of absorbed carbon-di-oxide.
Features:
- Silica Heater.
- Over Heat protection:- Pressure Temperature Switch (PTS): Shuts off the unit when water level in the boiler falls below the heater.
- Gate Value to prevent water wastage.
- Flow switch for boiler safety.
- Teflon drain cock for easy maintenance.
- High quality distillate.
- Power coated stand.
- Safety Built - in.
Silica Heater:
 |
Labo Still-Boro-4S is Provided with a threaded Connection for easy, safe and quick assembly of Silica Heater.
|
Easy Cleaning:
 |
The Boiler is provided with a Teflon screw cock for easy cleaning of the boiler
|
Screw Thread Connectors:
 |
All plumbing connections are via screw thread connectors with silicon rubber ‘o’ rings. This facilitates easy fitting and removal of hose, without using excessive force, avoiding the danger of glassware breakage adoring assembly
|
Ordering Information:
|
Cat. No.
|
Description
|
|
Labo Still-Boro-4S
|
Labo Water Distillation Unit: Single Distillation
|
|
Labo Still-Boro-4D
|
Labo Water Distillation Unit: Double Distillation
|
Spares for Above Water Distillation Units:
|
Cat. No.
|
Description
|
|
LS-Boro-B
|
Boiler
|
|
LS-Boro-C
|
Condenser
|
|
LS-Boro-SH
|
3 KW Silica Heater
|
|
Conductivity for single 1.0 – 2.0 µS/cm.
|
|
Conductivity for double 0.8 – 1.0 µS/cm.
|
Packing: For Labo Still-Boro-4S/D:
Dimensions of the box: 79 x 53 x 26 cms. (7 Ply carton box)
Gross Weight of the box: 14.50 kgs.
