Steam Sterilizer (Horizontal High Pressure Cylindrical)

Application

• "MEDBERG" Horizontal Triple Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.

• All ideal tool for Laboratories, hospitals, nursing home, R&D labs etc.

Constructional And Features

• The inner chamber, steam jacket, outer chamber and boiler are made of heavy gauge stainless steel with leak proof argon arc welding.

• Lid is made of thick machined Mild Steel plate lined with stainless steel from inside

• The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.

• Hydraulically tested to withstand 2.5 times the working pressure.

• Steam boiler is fitted with water level indicator, pressure gauge, low water cut-off device and automatic pressure control device.

• Fitted with safety valve as a safety device.

• Drain valve is fitted at the side bottom for easy draining/cleaning.

• The unit is provided with a positive self-locking safety door which cannot be opened while the chamber is under pressure and disengages automatically when chamber is exhausted.

• This affords complete safety to the working personnel against explosive opening.

• Two separate valves are provided for evacuating steam from inner chamber and jackets as and when desired.

• Sterilization Cycle is controlled by SINGLE POINT MULTIPORT Valve.

• The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.

• An automatic vacuum breaker is fitted to all "MEDBERG" units as a standard accessory, in order to break vacuum in case of steam condensation.

• The flanged immersion type heating element made from very high grade material provides fast formation of pressure in the system and are protected through a electric low water level cut-off device.

• All "MEDBERG" Sterilizers are provided with triple safety features, through a "PIEZOSTAT" (Automatic Pressure Control System) and a spring loaded safety valve fitted to the boiler/steam generator. The chamber is fitted with spring loaded safety valve and a dead weight release valve.

• Highly accurate temperature indicator is fitted for monitoring temperature.

• To work on 440Volts, 3phase, 50Hz AC supply.

 Technical Specification And Ordering Information

OPTIONAL

• Digital Temperature Indicator can be supplied in lieu of dial thermometer.

• Microprocessor Based Semi-Automatic Digital Controller with AUTO-TIME CONTROL SYSTEM. After the set temperature is attained the timer starts automatically and on completion of set count down/up time the supply to heaters is cut-off and the system sounds a buzzer alerting user that the cycle is over.

• Digital Pressure Indicator displayed directly into the main control panel.

• Extra injector in addition to vacuum dry can be provided at an extra cost for better drying

• POP type safety valve in lieu of spring loaded safety valve at an extra cost

• Double door for any of the above models to cost extra.

• Temperature recorder for recording temperature will cost extra.

• SOFKLAVE 2000:

1. A semiautomatic MICRO CONTROL system with total 4 fixed programs (selectable manually) with digital temperature control and CENTRONIC OUTPUT PORT for on-line printing.

2. do- same as above but with 5 fixed programs and one flexible sterilization cycle with digital temperature control and CENTRONIC OUTPUT PORT for on line Printing.

• SOFKLAVE 2000(PRO) : An INEGRATED FULLY AUTOMATIC LCD AUTO-CONTROL PROGRAMME with PLC and built in HMI controller having 5 fixed programmes and one flexible sterilization cycle with 16x2 alphanumeric display and CENTRONIC OUTPUT PORT for on-line printing.

• Multipoint Temperature/Pressure Scanner with LCD display and CENTRONIC port for printer. Total 6 scanning points with five for temperature and on for pressure. Supplied complete with Nos. RTD probes and communication cable for attaching to printer.