Home >
3 CYLINDER 4 STROKE PETROL ENGINE TEST RIG With Hydraulic Brake Dynamometer

3 CYLINDER 4 STROKE PETROL ENGINE TEST RIG With Hydraulic Brake Dynamometer

Code:

DESCRIPTION :

IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine (3 Cylinder 4 Stroke Water Cooled Petrol Engine), dynamometer, fuel measuring, air intake measuring and various other arrangements. Provision for mores test is done.

EXPERIMENTATION:

To determine specific fuel consumption.
To determine Brake Horse Power.
To determine Brake Thermal Efficiency.
To determine mechanical efficiency
To determine indicated thermal efficiency

UTILITIES REQUIRED :

Electric Supply : Single Phase, 220 V, 10Amp.
Continuous Water Supply : 10 LPM Approx. at ½ kg/cm2 Pressure for Engine cooling and 10 LPM at 2 kg/cm2 Pressure for Hydraulic Brake Dynamometer
Fuel : 20 Ltrs. (Petrol)
Floor Area : 3m X 2m
Battery Unit : 12 Volt 88 Amp.

TECHNICAL DETAILS:

Type of Engine	Three Cylinder, Four stroke, water cooled Petrol Engine
Type of Loading	Hydraulic Brake Dynamometer
Fuel Measuring System	Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement.
Air Intake Measuring System	Air tank fitted with orifice and watermanometer.
Measurement of Heat Carried	It consist of inlet outlet piping with flow control valve, water away by cooling water meter to measure the rate of flow of cooling water Temperature Sensors are provided to measure the Temperature of Inlet & Outlet
Temperature Measurement	Digital Temperature Indicator withmulti-channel switch
Temperature Sensors	RTD PT-100 type
RPM measurement	RPM Indicator with Proximity sensor.
Exhaust Gas Calorimeter	Made of Stainless Steel including the body & the tube for cooling water circulation and designed to get maximum temperature difference. The body of the calorimeter is insulated on all sides to prevent heat losses due to radiation.
Panel Board Arrangement	Panel Board Arrangement consisting of ignition & starting switch, a high voltage knife switch assembly for cutting off eachcylinder for Morse test.
OPTIONAL	Pump: 1 HP Pump for Hydraulic Brake Dynamometer
An ENGLISH instruction manual will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Ordering Details:

Catalogue No	Description
JITD-002C	3 CYLINDER 4 STROKE PETROL ENGINE TESTRIG With Hydraulic Brake Dynamometer

Description

Details

DESCRIPTION :

IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine (3 Cylinder 4 Stroke Water Cooled Petrol Engine), dynamometer, fuel measuring, air intake measuring and various other arrangements. Provision for mores test is done.

EXPERIMENTATION:

To determine specific fuel consumption.
To determine Brake Horse Power.
To determine Brake Thermal Efficiency.
To determine mechanical efficiency
To determine indicated thermal efficiency

UTILITIES REQUIRED :

Electric Supply : Single Phase, 220 V, 10Amp.
Continuous Water Supply : 10 LPM Approx. at ½ kg/cm2 Pressure for Engine cooling and 10 LPM at 2 kg/cm2 Pressure for Hydraulic Brake Dynamometer
Fuel : 20 Ltrs. (Petrol)
Floor Area : 3m X 2m
Battery Unit : 12 Volt 88 Amp.

TECHNICAL DETAILS:

Type of Engine	Three Cylinder, Four stroke, water cooled Petrol Engine
Type of Loading	Hydraulic Brake Dynamometer
Fuel Measuring System	Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement.
Air Intake Measuring System	Air tank fitted with orifice and watermanometer.
Measurement of Heat Carried	It consist of inlet outlet piping with flow control valve, water away by cooling water meter to measure the rate of flow of cooling water Temperature Sensors are provided to measure the Temperature of Inlet & Outlet
Temperature Measurement	Digital Temperature Indicator withmulti-channel switch
Temperature Sensors	RTD PT-100 type
RPM measurement	RPM Indicator with Proximity sensor.
Exhaust Gas Calorimeter	Made of Stainless Steel including the body & the tube for cooling water circulation and designed to get maximum temperature difference. The body of the calorimeter is insulated on all sides to prevent heat losses due to radiation.
Panel Board Arrangement	Panel Board Arrangement consisting of ignition & starting switch, a high voltage knife switch assembly for cutting off eachcylinder for Morse test.
OPTIONAL	Pump: 1 HP Pump for Hydraulic Brake Dynamometer
An ENGLISH instruction manual will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Ordering Details:

Catalogue No	Description
JITD-002C	3 CYLINDER 4 STROKE PETROL ENGINE TESTRIG With Hydraulic Brake Dynamometer

Additional Information

Additional Information

Code	No

Reviews

Be the first to review this product

3 CYLINDER 4 STROKE PETROL ENGINE TEST RIG With Hydraulic Brake Dynamometer

3 CYLINDER 4 STROKE PETROL ENGINE TEST RIG With Hydraulic Brake Dynamometer Send Enquire

Details

Additional Information

Information

Contacts

3 CYLINDER 4 STROKE PETROL ENGINE TEST RIG With Hydraulic Brake Dynamometer