Home >
4 CYLINDER 4 STROKE PETROL ENGINE TEST RIG With Eddy Current Dynamometer

4 CYLINDER 4 STROKE PETROL ENGINE TEST RIG With Eddy Current Dynamometer

Code:

DESCRIPTION :

IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine.  It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements. Provision for mores test is done.

EXPERIMENTATION:

To determine specific fuel consumption.
To determine Brake Horse Power.
To determine Brake Thermal Efficiency.
To determine mechanical efficiency
To determine indicated thermal efficiency

UTILITIES REQUIRED :

Electric Supply : Single Phase, 220 V, 10Amp.
Continuous Water Supply : 10 LPM Approx. at ½ kg/cm2 Pressure for Engine cooling and 10 LPM at 2 kg/cm2 Pressure for Hydraulic Brake Dynamometer
Fuel : 20 Ltrs. (Petrol)
Floor Area : 3m X 2m
Battery Unit : 12 Volt 88 Amp.

TECHNICAL DETAILS:

Type of Engine	Multi Cylinder, Four stroke, water cooled Petrol Engine
Type of Loading	Eddy Current Dynamometer
Air Intake Measuring System	Air tank fitted with orifice and water manometer.
Fuel Measuring System	Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement.
Measurement of Heat Carried	It consist of inlet outlet piping with flow control valve, water away by cooling water meter to measure the rate of flow of cooling water Temperature Sensors are provided to measure the Temperature of Inlet & Outlet
TemperatureMeasurement	Digital Temperature Indicator with multi-channel switch
Temperature Sensors	RTD PT-100 type
RPM measurement	RPM Indicator with Proximity sensor.
Exhaust Gas Calorimeter	Made of Stainless Steel including the body & the tube for cooling water circulation and designed to get maximum temperaturedifference. The body of the calorimeter is insulated on all sides to prevent heat losses due to radiation.
Panel Board Arrangement	Panel Board Arrangement consisting of ignition & starting switch, a high voltage knife switch assembly for cutting off each cylinder for Morse test.
An ENGLISH instruction manual will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Ordering Details:

Catalogue No	Description
JITD-003D	4 CYLINDER 4 STROKE PETROL ENGINE TESTRIG With Eddy Current Dynamometer

Description

Details

DESCRIPTION :

IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine.  It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements. Provision for mores test is done.

EXPERIMENTATION:

To determine specific fuel consumption.
To determine Brake Horse Power.
To determine Brake Thermal Efficiency.
To determine mechanical efficiency
To determine indicated thermal efficiency

UTILITIES REQUIRED :

Electric Supply : Single Phase, 220 V, 10Amp.
Continuous Water Supply : 10 LPM Approx. at ½ kg/cm2 Pressure for Engine cooling and 10 LPM at 2 kg/cm2 Pressure for Hydraulic Brake Dynamometer
Fuel : 20 Ltrs. (Petrol)
Floor Area : 3m X 2m
Battery Unit : 12 Volt 88 Amp.

TECHNICAL DETAILS:

Type of Engine	Multi Cylinder, Four stroke, water cooled Petrol Engine
Type of Loading	Eddy Current Dynamometer
Air Intake Measuring System	Air tank fitted with orifice and water manometer.
Fuel Measuring System	Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement.
Measurement of Heat Carried	It consist of inlet outlet piping with flow control valve, water away by cooling water meter to measure the rate of flow of cooling water Temperature Sensors are provided to measure the Temperature of Inlet & Outlet
TemperatureMeasurement	Digital Temperature Indicator with multi-channel switch
Temperature Sensors	RTD PT-100 type
RPM measurement	RPM Indicator with Proximity sensor.
Exhaust Gas Calorimeter	Made of Stainless Steel including the body & the tube for cooling water circulation and designed to get maximum temperaturedifference. The body of the calorimeter is insulated on all sides to prevent heat losses due to radiation.
Panel Board Arrangement	Panel Board Arrangement consisting of ignition & starting switch, a high voltage knife switch assembly for cutting off each cylinder for Morse test.
An ENGLISH instruction manual will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Ordering Details:

Catalogue No	Description
JITD-003D	4 CYLINDER 4 STROKE PETROL ENGINE TESTRIG With Eddy Current Dynamometer

Additional Information

Additional Information

Code	No

Reviews

Be the first to review this product

4 CYLINDER 4 STROKE PETROL ENGINE TEST RIG With Eddy Current Dynamometer

4 CYLINDER 4 STROKE PETROL ENGINE TEST RIG With Eddy Current Dynamometer Send Enquire

Details

Additional Information

Information

Contacts

4 CYLINDER 4 STROKE PETROL ENGINE TEST RIG With Eddy Current Dynamometer