Home >
BEND METER TEST RIG

BEND METER TEST RIG

Code:

DESCRIPTION :

The apparatus consists of a pipeline that contains one Bend meter. The pressure tapings from the Bend meter is taken to differential manometer to measure pressure difference.

Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

EXPERIMENTATION:

To demonstrate the use of Bend meter as flow meter.
To determine co-efficient of discharge for given Bend meter.

UTILITIES REQUIRED :

Electricity supply: Single Phase, 220 VAC, 50 Hz, 5-15 amp combined socket with earth connection.
Water Supply (Initial Fill).
Floor Drain required.
Floor Area required: 1.5 m x 0.75 m

TECHNICAL DETAILS:

Bend meter	Material Stainless steel Compatible to 1” Dia. Pipe.
Water Circulation	FHP Pump, Crompton make
Flow Measurement	Using Measuring Tank (Capacity 25 Ltrs. approx.) with Electronic Stop Watch
Sump Tank	Capacity 50 Ltrs. (approx.)
Control Panel Comprises of	Standard make On/Off Switch, Mains Indicator, etc.
Tanks will be made of Stainless Steel.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Ordering Details:

Catalogue No.	Description
JIHD-024	BEND METER TEST RIG

Description

Details

DESCRIPTION :

The apparatus consists of a pipeline that contains one Bend meter. The pressure tapings from the Bend meter is taken to differential manometer to measure pressure difference.

Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

EXPERIMENTATION:

To demonstrate the use of Bend meter as flow meter.
To determine co-efficient of discharge for given Bend meter.

UTILITIES REQUIRED :

Electricity supply: Single Phase, 220 VAC, 50 Hz, 5-15 amp combined socket with earth connection.
Water Supply (Initial Fill).
Floor Drain required.
Floor Area required: 1.5 m x 0.75 m

TECHNICAL DETAILS:

Bend meter	Material Stainless steel Compatible to 1” Dia. Pipe.
Water Circulation	FHP Pump, Crompton make
Flow Measurement	Using Measuring Tank (Capacity 25 Ltrs. approx.) with Electronic Stop Watch
Sump Tank	Capacity 50 Ltrs. (approx.)
Control Panel Comprises of	Standard make On/Off Switch, Mains Indicator, etc.
Tanks will be made of Stainless Steel.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Ordering Details:

Catalogue No.	Description
JIHD-024	BEND METER TEST RIG

Additional Information

Additional Information

Code	No

Reviews

Be the first to review this product

BEND METER TEST RIG

BEND METER TEST RIG Send Enquire

Details

Additional Information

Information

Contacts

BEND METER TEST RIG