jainsonsindia partners
sales@jainsonsindia.com    +91-9896353519    
 Enquiry Cart
≡MENU
  • Home >
  • DIRECT ACTION SHALLOWWELL HAND PUMP

DIRECT ACTION SHALLOWWELL HAND PUMP

DIRECT ACTION SHALLOWWELL HAND PUMP

More Views

DIRECT ACTION SHALLOWWELL HAND PUMP

Code: 
DIRECT ACTION SHALLOWWELL HAND PUMP

Direct action hand pump with a VLOM concept. Entire above the ground mechanism is of steel construction, hot dip galvanized to prevent from rusting. Direct action hand pump is suitable for lifting water from bore well with static water level not exceeding 15 meters. The cylinder assembly consists of cylinder pipe, piston, piston rod, food valve receiver, it provides necessary pumping action and lifts water upward through rising mains, the pump rod assembly provides linkage between pump handle and piston in cylinder, with its light weight and high displacement capacity, these rods are buoyant and help in reducing the effort required during upward stroke. The rising mains carries water from cylinder to pump. The hand pump is supplied along with a special type of combination spanner required for installation and maintenance and also a retrieving rod which helps in extracting foot valve assembly from cylinder for village level operational maintenance by communities. 
 
 Stroke length – 300 mm
 Discharge -21 Ltrs. For 30 continuous strokes per minute
Item  Normal Dia  Mean OD Wall Thickness Oty. Per Cylinder
Min Max Min Max 3000+10
Upper casing 80 88.0 88.3 4.0 4.6 3000+10
Rising main 50 60.0 60.2 2.5 3.0 3000+10
Lower casing 40 48.0 48.2 3.5 4.0 1000+10
Top pump rod 32 42.0 42.2 2.2 2.7 3000+10
Pump rodl 32 42.0 42.2 2.2 2.7 3000+10
Sand trap 40 48.0 48.2 3.5 4.0 1000+10
Piston rod 32 42.0 42.2 2.2 2.7 1000+10
Cylinder pipe 50 60.0 60.2 2.5 3.0 3000+10 
 
ORDERING DETAILS:
Catalogue No. Description
JHP-1850 DIRECT ACTION SHALLOWWELL HAND PUMP 
 

Description

Details

DIRECT ACTION SHALLOWWELL HAND PUMP

Direct action hand pump with a VLOM concept. Entire above the ground mechanism is of steel construction, hot dip galvanized to prevent from rusting. Direct action hand pump is suitable for lifting water from bore well with static water level not exceeding 15 meters. The cylinder assembly consists of cylinder pipe, piston, piston rod, food valve receiver, it provides necessary pumping action and lifts water upward through rising mains, the pump rod assembly provides linkage between pump handle and piston in cylinder, with its light weight and high displacement capacity, these rods are buoyant and help in reducing the effort required during upward stroke. The rising mains carries water from cylinder to pump. The hand pump is supplied along with a special type of combination spanner required for installation and maintenance and also a retrieving rod which helps in extracting foot valve assembly from cylinder for village level operational maintenance by communities. 
 
 Stroke length – 300 mm
 Discharge -21 Ltrs. For 30 continuous strokes per minute
Item  Normal Dia  Mean OD Wall Thickness Oty. Per Cylinder
Min Max Min Max 3000+10
Upper casing 80 88.0 88.3 4.0 4.6 3000+10
Rising main 50 60.0 60.2 2.5 3.0 3000+10
Lower casing 40 48.0 48.2 3.5 4.0 1000+10
Top pump rod 32 42.0 42.2 2.2 2.7 3000+10
Pump rodl 32 42.0 42.2 2.2 2.7 3000+10
Sand trap 40 48.0 48.2 3.5 4.0 1000+10
Piston rod 32 42.0 42.2 2.2 2.7 1000+10
Cylinder pipe 50 60.0 60.2 2.5 3.0 3000+10 
 
ORDERING DETAILS:
Catalogue No. Description
JHP-1850 DIRECT ACTION SHALLOWWELL HAND PUMP 
 

Additional Information

Additional Information

Code No
Reviews

JAINSONS (INDIA) REGD.Since 1957Serving Above 52 Countries

Information

Contacts

Jainsons (India) Regd.

Rampur Sarseri Road,
Azad Nagar, Ambala Cantt,
Haryana - 133001

Ph: +91-171-2972829
Flag Counter

Copyright Jainsons. All Rights Reserved