Fume Hood with Digital Air Flow Monitor and Imported Exhaust System

Technical Specifications:

• Design Structures : Aerodynamic, floor mounted
• Air Flow Type : Automatic bypass type
• Construction (Exteriors) : Available in two options:-
• Stainless Steel 304gr. Outside & 316gr. S.S.Inside.
• Epoxy power coated 18 & 22 Gauge Galvanized Steel
• Baffle arrangement : 2 Point suction section with baffle to ensure smooth And immediate exhaust of fumes. As per ASHRAE & EN norms.
• Airfoil : Flush powder coated airfoil mounted on the worktop.
• Sash (Shutter) : Vertical Sliding Counter balanced toughened glass (5mm thick / Polycarbonate fitted in the powder coated Aluminum. Clear sash open height =500mm-675mm According to size & Fume Hood.
• Service Fittings : Remotely operated color coded ( as per international standard) total three services valves with SS breaded flexible hose & brass fittings (1 for water & 2 for gases).
• Lighting : CFL tube light (1x36W) with Polycarbonate enclosed for Better Illumination with less power concumption.
• Electrical utilitie : Four nos electrical sockets 15/5amp & switches, ‘North West / HAVELLS make \ 50Hz switches have LED to Indicators to show ON position of switches to be Provided. Control panel provided with starter for blower.
• Complete rigid structure to support fume hood.
• Double skin shutter with self closing hinges.
• Digital Air Flow : This device is an accessory for fume hood to indicate the Approximate face velocity of airflow with primary
  Purpose of warning when a low flow condition occurs. Red & LED’s correspond to low & normal flow rates. When flow decreases from normal to low an audible Alarm will also actuate requiring manual Acknowledgement for silence.
• Centrifugal Blowe : Silent high efficiency blower, consisting of continuous Rating motor and chemical resistant impeller. The blower Designed to give face velocity of 80 to 120 feet/minute (FPM) as per ANSI/AIHA Z9.5 at the safe working Height.
• Air suction capacity : Silent 650 CFM confirming to international face velocity Norms and a per fume hood airflow pattern. Fume Hood (Stainless Steel) Frame of S.S.304grade from outside & 316 grade inside.

Ordering Information:

Fume Hood (Stainless Steel) Frame of S.S.304gr from outside & 316 gr. inside.

 Fume Hood (Mild Steel)