Home >
HEAT TRANSFER FROM A PIN-FIN

HEAT TRANSFER FROM A PIN-FIN

More Views

HEAT TRANSFER FROM A PIN-FIN

Code:

DESCRIPTION:

The setup is designed to study the heat transfer in a pin fin. It consists of pin type fin fitted in a duct. A fan is provided on one side of duct to conduct experiments under forced draft conditions. Air flow rates can be varied. A heater heats one end of fin and heat flows to another end. Heat input to the heater is given through Variac. Digital voltmeter and digital ammeter are provided for heat measurement. Digital Temperature Indicator measures temperature distribution along the fin.


EXPERIMENTATION:

To study temperature distribution along the length of fin in both Free & forced convection.
Comparison of theoretical temperature distribution with that of experimentally obtained distribution.

UTILITIES REQUIRED:

Electricity Supply: 1 Phase, 220 V AC, 5 Amp.
Table for set-up support.

TECHNICAL DETAILS:

Fin	Pin type.
Material	Brass.
Size	12.5 mm (approx.) 15 cm. long (approx.).
Duct	Made of MS.
Fan	Standard make.
Heater	Band type, Nichrome Wire.
Control panel comprising of
Dimmerstat	0-230 V, 2 Amp.
Digital Temp. Indicator	0-199.9oC, with multi-channel switch
Temperature Sensors	RTD PT-100 type-8Nos. (7 for pin and 1 for duct temperature).
With standard make On/Off switch, Mains Indicator etc.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Ordering Details:

Catalogue No	Description
JIHT-004	HEAT TRANSFER FROM A PIN FIN

Description

Details

DESCRIPTION:

The setup is designed to study the heat transfer in a pin fin. It consists of pin type fin fitted in a duct. A fan is provided on one side of duct to conduct experiments under forced draft conditions. Air flow rates can be varied. A heater heats one end of fin and heat flows to another end. Heat input to the heater is given through Variac. Digital voltmeter and digital ammeter are provided for heat measurement. Digital Temperature Indicator measures temperature distribution along the fin.


EXPERIMENTATION:

To study temperature distribution along the length of fin in both Free & forced convection.
Comparison of theoretical temperature distribution with that of experimentally obtained distribution.

UTILITIES REQUIRED:

Electricity Supply: 1 Phase, 220 V AC, 5 Amp.
Table for set-up support.

TECHNICAL DETAILS:

Fin	Pin type.
Material	Brass.
Size	12.5 mm (approx.) 15 cm. long (approx.).
Duct	Made of MS.
Fan	Standard make.
Heater	Band type, Nichrome Wire.
Control panel comprising of
Dimmerstat	0-230 V, 2 Amp.
Digital Temp. Indicator	0-199.9oC, with multi-channel switch
Temperature Sensors	RTD PT-100 type-8Nos. (7 for pin and 1 for duct temperature).
With standard make On/Off switch, Mains Indicator etc.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Ordering Details:

Catalogue No	Description
JIHT-004	HEAT TRANSFER FROM A PIN FIN

Additional Information

Additional Information

Code	No

Reviews

Be the first to review this product

HEAT TRANSFER FROM A PIN-FIN

More Views

HEAT TRANSFER FROM A PIN-FIN Send Enquire

Details

Additional Information

Information

Contacts

HEAT TRANSFER FROM A PIN-FIN