jainsonsindia partners
sales@jainsonsindia.com    +91-9896353519    
 Enquiry Cart
≡MENU
  • Home >
  • Heating & Cooling Chambers

Heating & Cooling Chambers

Heating & Cooling Chambers

More Views

Heating & Cooling Chambers

Code: 
Heating & Cooling Chambers 
-5℃ to 100℃ (H flow)
Temperature values of all chambers are measured according to DIN 12880 and IEC 60068-3-5.
 
Performance
  • Suitable for specific use such as heat treatment and drying process.
  • Microprocessor PID control / Temperature calibration / Automatic tuning.
  • Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
  • Two-point door latch also enhances tightness to door closure.
  • Energy efficiency is achieved thanks to optimization of the insulation system.
     - Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 51℃. (DIN EN 563)
  • Reliable design and production of door is guaranteed.
     - Evaluates the results after opening the door by 90 degrees and applying 50kg load to the point of 30cm from hinges.
Safety
  • User selectable operation mode after power interruption
     - ether Automatic run or Manual run.
  • Over-temperature protection.
  • Over-current and current leakage protection. (ELCB, earth leakage circuit breaker)
  • Independent safety fuse.
     - Important parts such as controller and heaters are highly secured from short circuit. Especially each heater has an individual fuse to completely break a short circuit.
  • Reversed-phase protection.
     - Electrical connection error indicator helps user to rapidly fix the connection.
  • Over-current protection of motor.
     - Automatic shut-off in situations where there is over-current to the motor.
  • Open door warning.
     - Heater and fan stop when the door is the open state.
  • Electric wiring panel access warning.
     - Automatic stop if the cover of electric wiring panel is opened.
  • Built in door lock with a key.
Convenience
  • Corrosion resistance stainless steel inner chamber.
  • Space efficient and easy loading chamber design.
     - Included two shelves for loading of large amounts of samples.
     - Heavy load shelving, rated for 40kg are also available. (optional)
  • User friendly LCD controller.
     - Colorful interactive touch type LCD controller.
     - Set point temperature and present temperature are clearly shown together on display.
     - Sufficient programmable control support.
     - Operating progress can be shown in graph mode for better data understanding.
     - Automatic start/stop can be programmed for unattended operations.
     - Display indicates abnormal temperature changes or power failures.
     - Three different language support. (English / Chinese / Korean)
     - Temperature and other operating parameters can be recorded using a six channel digital recorder. (optional)
  • Computer interface.
     - RS-485 communication port (optional) enables connection up to maximum 32 units. Simultaneous monitoring and operating of multiple units is an available feature.
     - Program patterns are simple to set with the use of our software.
     - Easy to check status of real-time operations. Graph data supports easy understanding.
     - Storage and documentation of programs.
     - Data with saving capabilities in excel and text format.
     - Storage of program information, backup of value settings, recovery, and temperature values.
     - RS-232 communication port as standard offer
Description No
Programmable pattern capacity 100
Pattern repeat time 999
Part repeat time 255
Max. segments per a pattern 100
Available max. segments* 2000
Programmable process time per a segment 0 to 99 hr. 59 min. 
* Even though the max. segments per pattern are 100, the total available segments are up to 6000 not 10000, therefore arrangement of the number of segment and patterns will need to be done properly.
Model LSPMV-012 LSPMV-025 LSPMV-040
Chamber volume (L / cu ft) 125 / 4.4 250 / 8.8 400 / 14.1
Controller Programmable, Touch screen type controller (3.5” color monitor)
Temperature range (℃ / ℉) -5 to 100 / -23 to 212
Temperature fluctuation1) 2) at 25℃ (±℃ / ℉) 0.3 / 0.54 0.3 / 0.54 0.3 / 0.54
Temperature variation2) (±℃ / ℉) at -5℃ 0.4 / 0.72 0.4 / 0.72 0.4 / 0.72
at 0℃ 0.4 / 0.72 0.4 / 0.72 0.4 / 0.72
at 25℃ 0.2 / 0.36 0.2 / 0.36 0.3 / 0.54
at 40℃ 0.3 / 0.54 0.3 / 0.54 0.3 / 0.54
at 60℃ 0.5 / 0.90 0.5 / 0.90 0.4 / 0.72
at 80℃ 0.7 / 1.26 0.7 / 1.26 0.6 / 1.08
at 100℃ 1.0 / 1.80 1.0 / 1.80 0.8 / 1.44
Heating time2) (min.) from 25℃ to 100℃ 45 45 48
Cooling time2) (min.) from 25℃ to -5℃ 44 44 43
Recovery time2)after doorwas opened (min.) at -5℃ 8.0 8.0 6.5
at 0℃ 6.0 6.0 6.0
at 25℃ 0.5 0.5 4.0
at 40℃ 2.5 2.5 2.5
at 60℃ 4.0 4.0 4.5
at 80℃ 5.0 5.0 5.0
at 100℃ 7.0 7.0 7.0
Program control Temperature range (℃ / ℉) 5.5 to 89.5 / 9.9 to 161.5
Heating rate (℃ / ℉ per min.)from -12.5℃ to 87.5℃ 1.7 / 3.06 1.7 / 3.06 1.6 / 2.88
Cooling rate (℃ / ℉ per min.)from 87.5℃ to -12.5℃ 0.9 / 1.62 0.9 / 1.62 0.9 / 1.62
No. of wire shelves (standard / max.) 2 / 13 2 / 18 2 / 23
Distance of between shelves (mm / inch) 30 / 1.2
Max. load per shelf (kg / lbs) 15 / 33.1 20 / 44.1 30 / 66.1
Permitted total load (kg / lbs) 50 / 110.2 70 / 154.3 90 / 198.4
Dimension (W×D×H) Interior (mm / inch) 500×500×500/ 19.7×19.7×19.7 600×650×650/ 23.6×25.6×25.6 750×700×800/ 29.5×27.6×31.5
Exterior (mm / inch) 1054×706×1380/ 41.5×27.8×54.3 1154×856×1565/ 45.4×33.7×61.6 1304×906×1750/ 51.3×35.7×68.9
Net weight (kg / lbs) 160 / 352.7 260 / 573.2 320 / 705.5
Interface port Basically RS-232C [RS-485(maximum 32 units control)-optional]
Electrical requirements (230V, 60Hz) 1ph / 9.7A 1ph / 13.2A 1ph / 15.5A
Electrical requirements (230V, 50Hz) 1ph / 9.7A 1ph / 13.2A 1ph / 15.5A
Description

Details

Heating & Cooling Chambers 
-5℃ to 100℃ (H flow)
Temperature values of all chambers are measured according to DIN 12880 and IEC 60068-3-5.
 
Performance
  • Suitable for specific use such as heat treatment and drying process.
  • Microprocessor PID control / Temperature calibration / Automatic tuning.
  • Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
  • Two-point door latch also enhances tightness to door closure.
  • Energy efficiency is achieved thanks to optimization of the insulation system.
     - Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 51℃. (DIN EN 563)
  • Reliable design and production of door is guaranteed.
     - Evaluates the results after opening the door by 90 degrees and applying 50kg load to the point of 30cm from hinges.
Safety
  • User selectable operation mode after power interruption
     - ether Automatic run or Manual run.
  • Over-temperature protection.
  • Over-current and current leakage protection. (ELCB, earth leakage circuit breaker)
  • Independent safety fuse.
     - Important parts such as controller and heaters are highly secured from short circuit. Especially each heater has an individual fuse to completely break a short circuit.
  • Reversed-phase protection.
     - Electrical connection error indicator helps user to rapidly fix the connection.
  • Over-current protection of motor.
     - Automatic shut-off in situations where there is over-current to the motor.
  • Open door warning.
     - Heater and fan stop when the door is the open state.
  • Electric wiring panel access warning.
     - Automatic stop if the cover of electric wiring panel is opened.
  • Built in door lock with a key.
Convenience
  • Corrosion resistance stainless steel inner chamber.
  • Space efficient and easy loading chamber design.
     - Included two shelves for loading of large amounts of samples.
     - Heavy load shelving, rated for 40kg are also available. (optional)
  • User friendly LCD controller.
     - Colorful interactive touch type LCD controller.
     - Set point temperature and present temperature are clearly shown together on display.
     - Sufficient programmable control support.
     - Operating progress can be shown in graph mode for better data understanding.
     - Automatic start/stop can be programmed for unattended operations.
     - Display indicates abnormal temperature changes or power failures.
     - Three different language support. (English / Chinese / Korean)
     - Temperature and other operating parameters can be recorded using a six channel digital recorder. (optional)
  • Computer interface.
     - RS-485 communication port (optional) enables connection up to maximum 32 units. Simultaneous monitoring and operating of multiple units is an available feature.
     - Program patterns are simple to set with the use of our software.
     - Easy to check status of real-time operations. Graph data supports easy understanding.
     - Storage and documentation of programs.
     - Data with saving capabilities in excel and text format.
     - Storage of program information, backup of value settings, recovery, and temperature values.
     - RS-232 communication port as standard offer
Description No
Programmable pattern capacity 100
Pattern repeat time 999
Part repeat time 255
Max. segments per a pattern 100
Available max. segments* 2000
Programmable process time per a segment 0 to 99 hr. 59 min. 
* Even though the max. segments per pattern are 100, the total available segments are up to 6000 not 10000, therefore arrangement of the number of segment and patterns will need to be done properly.
Model LSPMV-012 LSPMV-025 LSPMV-040
Chamber volume (L / cu ft) 125 / 4.4 250 / 8.8 400 / 14.1
Controller Programmable, Touch screen type controller (3.5” color monitor)
Temperature range (℃ / ℉) -5 to 100 / -23 to 212
Temperature fluctuation1) 2) at 25℃ (±℃ / ℉) 0.3 / 0.54 0.3 / 0.54 0.3 / 0.54
Temperature variation2) (±℃ / ℉) at -5℃ 0.4 / 0.72 0.4 / 0.72 0.4 / 0.72
at 0℃ 0.4 / 0.72 0.4 / 0.72 0.4 / 0.72
at 25℃ 0.2 / 0.36 0.2 / 0.36 0.3 / 0.54
at 40℃ 0.3 / 0.54 0.3 / 0.54 0.3 / 0.54
at 60℃ 0.5 / 0.90 0.5 / 0.90 0.4 / 0.72
at 80℃ 0.7 / 1.26 0.7 / 1.26 0.6 / 1.08
at 100℃ 1.0 / 1.80 1.0 / 1.80 0.8 / 1.44
Heating time2) (min.) from 25℃ to 100℃ 45 45 48
Cooling time2) (min.) from 25℃ to -5℃ 44 44 43
Recovery time2)after doorwas opened (min.) at -5℃ 8.0 8.0 6.5
at 0℃ 6.0 6.0 6.0
at 25℃ 0.5 0.5 4.0
at 40℃ 2.5 2.5 2.5
at 60℃ 4.0 4.0 4.5
at 80℃ 5.0 5.0 5.0
at 100℃ 7.0 7.0 7.0
Program control Temperature range (℃ / ℉) 5.5 to 89.5 / 9.9 to 161.5
Heating rate (℃ / ℉ per min.)from -12.5℃ to 87.5℃ 1.7 / 3.06 1.7 / 3.06 1.6 / 2.88
Cooling rate (℃ / ℉ per min.)from 87.5℃ to -12.5℃ 0.9 / 1.62 0.9 / 1.62 0.9 / 1.62
No. of wire shelves (standard / max.) 2 / 13 2 / 18 2 / 23
Distance of between shelves (mm / inch) 30 / 1.2
Max. load per shelf (kg / lbs) 15 / 33.1 20 / 44.1 30 / 66.1
Permitted total load (kg / lbs) 50 / 110.2 70 / 154.3 90 / 198.4
Dimension (W×D×H) Interior (mm / inch) 500×500×500/ 19.7×19.7×19.7 600×650×650/ 23.6×25.6×25.6 750×700×800/ 29.5×27.6×31.5
Exterior (mm / inch) 1054×706×1380/ 41.5×27.8×54.3 1154×856×1565/ 45.4×33.7×61.6 1304×906×1750/ 51.3×35.7×68.9
Net weight (kg / lbs) 160 / 352.7 260 / 573.2 320 / 705.5
Interface port Basically RS-232C [RS-485(maximum 32 units control)-optional]
Electrical requirements (230V, 60Hz) 1ph / 9.7A 1ph / 13.2A 1ph / 15.5A
Electrical requirements (230V, 50Hz) 1ph / 9.7A 1ph / 13.2A 1ph / 15.5A
Additional Information

Additional Information

Code No
Reviews

JAINSONS (INDIA) REGD.Since 1957Serving Above 52 Countries

Information

Contacts

Jainsons (India) Regd.

Rampur Sarseri Road,
Azad Nagar, Ambala Cantt,
Haryana - 133001

Ph: +91-171-2972829
Flag Counter

Copyright Jainsons. All Rights Reserved