jainsonsindia partners
sales@jainsonsindia.com    +91-9896353519    
 Enquiry Cart
≡MENU
  • Home >
  • INDIA MARK III

INDIA MARK III

INDIA MARK III

More Views

INDIA MARK III

Code: 
INDIA MARK III

SALIENT FEATURES DATA
  • 125 mm stroke length of the handle provides a good water discharge with the cylinder installed in the range of the 15 m to 50 m below-ground level.
  • The water tank assembly has the appropriate coupler to suit 65 mm or 50 mm NB Gl riser pipes. A special cone plate with rubber cone is available for installation of uPVC riser pipes. The cone plate and cone can also be used to reduce stresses on the Gl riser pipe joint to the water tank.
  • The Cylinder incorporates an open top cap and suitable plunger and check valve assemblies to facilitate their removal for maintenance without the need to lift the riser pipes out of the borewell.
  • Cylinder is adaptable for use with Universal Cylinder components.
  • Options for Brass fitting for fixing of HDPE pipes as per Sri Lankan Model.
  • 2” CYLINDERS ARE AVAIALBLE IN CAST IRON, FULLY BRASS,  UPVC,  AND STAINLESS STEEL BODY.
  • 2 ½” CYLINDERS ARE AVAILABLE IN CAST IRON & STAINLESS STEEL BODY.
APPLICATION DATA AND ORDERING DETAILS
Catalogue No JVLOM-65

Minimum bore size		   ... 125 mm.
Internal dia. of Cylinder   ... 65.35 mm
Stroke length   ... 125±4 mm.
Average discharge per stroke   ... 12 TO 15 litres per minute of 40 strokes.
Operating depth (approx.)   ... up to 30 meters 
 
APPLICATION DATA AND ORDERING DETAILS
Catalogue No JVLOM-50
Minimum bore size   ... 100 mm.
Internal dia. of Cylinder   ...  51.8 mm
Stroke length   ... 125±4 mm.
Average discharge per stroke   ... 09 TO 10 liters per minute of 40 strokes.
Operating depth (approx.)   ... up to 50 meters 
 
SPARE PART SET
 
S No DESCRIPTION QTY
1. Hexagonal bolts M12x1.75x40 4
2. Hexagonal nuts M12x1.75 8
3. Hexagonal bolts M10x 1.5 x40 (high tensile) 1
4. Nyioc Nut M10,, 1
5. Handle axle,, 1
6. Washer (4mm thick )for axle 1
7. Bearings (6204Z) 2
8. Spacer,, 1
9. Chain with coupling 1
10. Bolt for front cover M12x1.75x20,, 1 
 
 
 
SPECIAL TOOL KIT
 
S No DESCRIPTION QTY
1. Connecting Rod Vice 1
2. Axle punch 1
3. Chain coupler supporting tool 1
4. Crank spanner 2
5. Connecting rod lifter 1
6. Bearing pressing tool 1
7. Rod coupler spanner 2
8. Water tank lifter 1
9. Pipe lifting spanner 3
10. Heavy duty clamp 1
11. Check valve puller 1
12. Tool box 1 
 
 
 
STANDARD TOOL KIT
 
S No DESCRIPTION QTY
1. Button die in high speed steel with die holder,M12 x 1.75 1
2. Thread tap in high speed steel with handle, M12 x 1.75 1
3. Pipe thread die with die stock ( for 1 ¼” or 2” pipe) 1
4. Pipe wrench 600mm 2
5. Pipe wrench 450mm 1
6. Double ended open jaw spanner 16x18mm 2
7. Screw driver 250mm 1
8. Adjustable spanner 250mm 1
9. Ball pein hammer with handle (1kg approx.) 1
10. Hack saw frame with six spare blades 300mm 1
11. Flat file with handle, rough, 250mm 1
12. Wire brush, fine wire 1
13. Lubricating oil in plastic can with nozzled outlet 200 ml
14. Multipurpose grease in packed container 2 kg
15. Nylon rope, 3mm 75meter
16. Spirit level 300mm 1
17. Tool box  1 
 

 
 
INDIA MARK III HAND PUMP (65 MM)
 
 SPARE PART SET
 
S No DESCRIPTION QTY
1. Hexagonal bolts M12x1.75x40 4
2. Hexagonal nuts M12x1.75 8
3. Hexagonal bolts M10x 1.5 x40 (high tensile) 1
4. Nyioc Nut M10,, 1
5. Handle axle,, 1
6. Washer (4mm thick )for axle 1
7. Bearings (6204Z) 2
8. Spacer,, 1
9. Chain with coupling 1
10. Bolt for front cover M12x1.75x20,, 1 
 
 
 
SPECIAL TOOL KIT
 
S No DESCRIPTION QTY
1. Connecting Rod Vice 1
2. Axle punch 1
3. Chain coupler supporting tool 1
4. Crank spanner 2
5. Connecting rod lifter 1
6. Bearing pressing tool 1
7. Rod coupler spanner 2
8. Water tank lifter 1
9. Pipe lifting spanner 3
10. Heavy duty clamp 1
11. Check valve puller 1
12. Tool box 1 
 
 
 
STANDARD TOOL KIT
 
S No DESCRIPTION QTY
1. Button die in high speed steel with die holder,M12 x 1.75 1
2. Thread tap in high speed steel with handle, M12 x 1.75 1
3. Pipe thread die with die stock ( for 1 ¼” or 2” pipe) 1
4. Pipe wrench 600mm 2
5. Pipe wrench 450mm 1
6. Double ended open jaw spanner 16x18mm 2
7. Screw driver 250mm 1
8. Adjustable spanner 250mm 1
9. Ball pein hammer with handle (1kg approx.) 1
10. Hack saw frame with six spare blades 300mm 1
11. Flat file with handle, rough, 250mm 1
12. Wire brush, fine wire 1
13. Lubricating oil in plastic can with nozzled outlet 200 ml
14. Multipurpose grease in packed container 2 kg
15. Nylon rope, 3mm 75meter
16. Spirit level 300mm 1
17. Tool box  1 

  
 
Description

Details

INDIA MARK III

SALIENT FEATURES DATA
  • 125 mm stroke length of the handle provides a good water discharge with the cylinder installed in the range of the 15 m to 50 m below-ground level.
  • The water tank assembly has the appropriate coupler to suit 65 mm or 50 mm NB Gl riser pipes. A special cone plate with rubber cone is available for installation of uPVC riser pipes. The cone plate and cone can also be used to reduce stresses on the Gl riser pipe joint to the water tank.
  • The Cylinder incorporates an open top cap and suitable plunger and check valve assemblies to facilitate their removal for maintenance without the need to lift the riser pipes out of the borewell.
  • Cylinder is adaptable for use with Universal Cylinder components.
  • Options for Brass fitting for fixing of HDPE pipes as per Sri Lankan Model.
  • 2” CYLINDERS ARE AVAIALBLE IN CAST IRON, FULLY BRASS,  UPVC,  AND STAINLESS STEEL BODY.
  • 2 ½” CYLINDERS ARE AVAILABLE IN CAST IRON & STAINLESS STEEL BODY.
APPLICATION DATA AND ORDERING DETAILS
Catalogue No JVLOM-65

Minimum bore size		   ... 125 mm.
Internal dia. of Cylinder   ... 65.35 mm
Stroke length   ... 125±4 mm.
Average discharge per stroke   ... 12 TO 15 litres per minute of 40 strokes.
Operating depth (approx.)   ... up to 30 meters 
 
APPLICATION DATA AND ORDERING DETAILS
Catalogue No JVLOM-50
Minimum bore size   ... 100 mm.
Internal dia. of Cylinder   ...  51.8 mm
Stroke length   ... 125±4 mm.
Average discharge per stroke   ... 09 TO 10 liters per minute of 40 strokes.
Operating depth (approx.)   ... up to 50 meters 
 
SPARE PART SET
 
S No DESCRIPTION QTY
1. Hexagonal bolts M12x1.75x40 4
2. Hexagonal nuts M12x1.75 8
3. Hexagonal bolts M10x 1.5 x40 (high tensile) 1
4. Nyioc Nut M10,, 1
5. Handle axle,, 1
6. Washer (4mm thick )for axle 1
7. Bearings (6204Z) 2
8. Spacer,, 1
9. Chain with coupling 1
10. Bolt for front cover M12x1.75x20,, 1 
 
 
 
SPECIAL TOOL KIT
 
S No DESCRIPTION QTY
1. Connecting Rod Vice 1
2. Axle punch 1
3. Chain coupler supporting tool 1
4. Crank spanner 2
5. Connecting rod lifter 1
6. Bearing pressing tool 1
7. Rod coupler spanner 2
8. Water tank lifter 1
9. Pipe lifting spanner 3
10. Heavy duty clamp 1
11. Check valve puller 1
12. Tool box 1 
 
 
 
STANDARD TOOL KIT
 
S No DESCRIPTION QTY
1. Button die in high speed steel with die holder,M12 x 1.75 1
2. Thread tap in high speed steel with handle, M12 x 1.75 1
3. Pipe thread die with die stock ( for 1 ¼” or 2” pipe) 1
4. Pipe wrench 600mm 2
5. Pipe wrench 450mm 1
6. Double ended open jaw spanner 16x18mm 2
7. Screw driver 250mm 1
8. Adjustable spanner 250mm 1
9. Ball pein hammer with handle (1kg approx.) 1
10. Hack saw frame with six spare blades 300mm 1
11. Flat file with handle, rough, 250mm 1
12. Wire brush, fine wire 1
13. Lubricating oil in plastic can with nozzled outlet 200 ml
14. Multipurpose grease in packed container 2 kg
15. Nylon rope, 3mm 75meter
16. Spirit level 300mm 1
17. Tool box  1 
 

 
 
INDIA MARK III HAND PUMP (65 MM)
 
 SPARE PART SET
 
S No DESCRIPTION QTY
1. Hexagonal bolts M12x1.75x40 4
2. Hexagonal nuts M12x1.75 8
3. Hexagonal bolts M10x 1.5 x40 (high tensile) 1
4. Nyioc Nut M10,, 1
5. Handle axle,, 1
6. Washer (4mm thick )for axle 1
7. Bearings (6204Z) 2
8. Spacer,, 1
9. Chain with coupling 1
10. Bolt for front cover M12x1.75x20,, 1 
 
 
 
SPECIAL TOOL KIT
 
S No DESCRIPTION QTY
1. Connecting Rod Vice 1
2. Axle punch 1
3. Chain coupler supporting tool 1
4. Crank spanner 2
5. Connecting rod lifter 1
6. Bearing pressing tool 1
7. Rod coupler spanner 2
8. Water tank lifter 1
9. Pipe lifting spanner 3
10. Heavy duty clamp 1
11. Check valve puller 1
12. Tool box 1 
 
 
 
STANDARD TOOL KIT
 
S No DESCRIPTION QTY
1. Button die in high speed steel with die holder,M12 x 1.75 1
2. Thread tap in high speed steel with handle, M12 x 1.75 1
3. Pipe thread die with die stock ( for 1 ¼” or 2” pipe) 1
4. Pipe wrench 600mm 2
5. Pipe wrench 450mm 1
6. Double ended open jaw spanner 16x18mm 2
7. Screw driver 250mm 1
8. Adjustable spanner 250mm 1
9. Ball pein hammer with handle (1kg approx.) 1
10. Hack saw frame with six spare blades 300mm 1
11. Flat file with handle, rough, 250mm 1
12. Wire brush, fine wire 1
13. Lubricating oil in plastic can with nozzled outlet 200 ml
14. Multipurpose grease in packed container 2 kg
15. Nylon rope, 3mm 75meter
16. Spirit level 300mm 1
17. Tool box  1 

  
 
Additional Information

Additional Information

Code No
Reviews

JAINSONS (INDIA) REGD.Since 1957Serving Above 52 Countries

Information

Contacts

Jainsons (India) Regd.

Rampur Sarseri Road,
Azad Nagar, Ambala Cantt,
Haryana - 133001

Ph: +91-171-2972829
Flag Counter

Copyright Jainsons. All Rights Reserved