Lab Mixed Bed

Water Treatment Plant

Lab Mixed Bed is used to obtain high purity, low conductivity water (<1µS/cm).

It is used as a polisher unit in series with the De-Mineralizer plant / Reverse Osmosis System.

The charged resin in the Mixed Bed removes all the minerals present in feed water and gives an output having electrical conductivity lesser than 1µS/cm. The low conductivity water thus obtained can be used for various laboratory and industrial applications where water of high purity is required.

Features:

• Low conductivity water (<1µS/cm)
• Highly Efficient resins
• Low Maintenance, No installation costs
• Available in three different models

Note:

When resin is exhausted, it has to be regenerated with caustic soda solution and dilute hydrochloric acid solution respectively.

Additional Specifications:

• Conductivity of Mixed Bed water is <1µS/cm
• PH of DM water is 6.8 - 7.2

Applications:

The Mixed Bed water can be used,

•  In Laboratories & Research Institutes
•  In Food and Diary Industries
•  In Breweries & Textile units
•  In Chemical Industries
•  In Pharmaceutical Industries
•  In Electronic Industries
•  In Storage Battery Industry and many more

Note:

• The quality and quantity of the Mixed Bed DM water depends entirely on the feed water
• Raw water should be free from turbidity, free chlorine, heavy metals, organic matter, oil and should be at ambient temperature
• The treated water is not bacteria / pyrogen free
• Suitable plants can be recommended based on the raw water analysis