jainsonsindia partners
sales@jainsonsindia.com    +91-9896353519    
 Enquiry Cart
≡MENU

LabSmith510 Benchtop Conductivity/TDS Meter

LabSmith510 Benchtop Conductivity/TDS Meter

More Views

LabSmith510 Benchtop Conductivity/TDS Meter

Code:

LabSmith510 Benchtop Conductivity/TDS Meter

High performance laboratory conductivity meter with TDS measurement mode, 1 to 3 points calibration, system menu contains 7 optional parameters. Accuracy: 1% F.S.

Features:
• High performance laboratory conductivity meter is suitable for routine measurements.
• 1 to 3 points push-button calibration with automatic calibration solution recognition.
• Selectable cell constant (0.1/1/10), temperature coefficient and TDS conversion factor.
• Automatic Temperature Compensation provides accurate reading over the entire range.
• Auto-Hold function freezes stable measured value for easy viewing and recording.
• Manual temperature calibration improves the measurement accuracy of meter.
• Selectable temperature unit (°C or °F) meets different application requirements.
• Help message as a operational guide that helps user quickly begin using the meter.
• System menu allows setting the 7 parameters, including the number of calibration points, temperature unit, hold function, etc.
• Reset feature automatically resumes all parameters back to factory default settings.

Applictaions:
• Water and wastewater treatment
• Research and educations
• Environmental monitoring and aquaculture
• Printing and chemical industry

Ordering Information with Technical Specifications:

Catalogue No. LabSmith510
Conductivity  
Range 0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
Accuracy ±1% F.S
Resolution 0.01, 0.1, 1
Calibration Points 1 to 3 points
Calibration Solutions 10µS/cm, 84µS/cm,1413µS/cm,12.88mS/cm,111.8mS/cm
TDS  
Range 0~100ppt (Max. 200ppt, depending on factor setting)
Accuracy ±1% F.S
TDS Factor 0.1~1.0 (Default 0.5)
Temperature  
Range 0~105°C, 32~221°F
Accuracy ±1°C
Resolution 0.1°C
Calibration Range Measured value ±10°C
Temperature Units °C or °F
Others  
Temperature Compensation 0~100°C, 32~212°F, Manual or Automatic
Temperature Coefficient 0.0~10.0%/°C
Cell Constant K=0.1, 1, 10 or User-defined
Normalization Temperature 25°C
Hold Function Manual or Automatic
Power Off Manual or Automatic (180 minutes after last key pressed)
Reset Function Yes
Connector 6-pin Mini Plug
Display LCD (135×75mm)
Power Requirements DC9V, using AC adapters,  220VAC/50Hz
Dimensions 210(L)×205(W)×75(H)mm
Weight 1.5kg

 

Accessories:

Catalogue No. Accessories
LabSmith510-S CON-1 Conductivity Electrode
TP-10K Temperature Probe
Conductivity Standard Solutions (84µS, 1413µS, 12.88mS)
DC9V Power Adapters
LabSmith510-DL CON-1 Conductivity Electrode
CON-0.1 Conductivity Electrode
Conductivity Standard Solutions (84µS, 1413µS, 12.88mS)
DC9V Power Adapters
LabSmith510-DH CON-1 Conductivity Electrode
CON-10 Conductivity Electrode
Conductivity Standard Solutions (84µS, 1413µS, 12.88mS)
DC9V Power Adapters
Description

Details

LabSmith510 Benchtop Conductivity/TDS Meter

High performance laboratory conductivity meter with TDS measurement mode, 1 to 3 points calibration, system menu contains 7 optional parameters. Accuracy: 1% F.S.

Features:
• High performance laboratory conductivity meter is suitable for routine measurements.
• 1 to 3 points push-button calibration with automatic calibration solution recognition.
• Selectable cell constant (0.1/1/10), temperature coefficient and TDS conversion factor.
• Automatic Temperature Compensation provides accurate reading over the entire range.
• Auto-Hold function freezes stable measured value for easy viewing and recording.
• Manual temperature calibration improves the measurement accuracy of meter.
• Selectable temperature unit (°C or °F) meets different application requirements.
• Help message as a operational guide that helps user quickly begin using the meter.
• System menu allows setting the 7 parameters, including the number of calibration points, temperature unit, hold function, etc.
• Reset feature automatically resumes all parameters back to factory default settings.

Applictaions:
• Water and wastewater treatment
• Research and educations
• Environmental monitoring and aquaculture
• Printing and chemical industry

Ordering Information with Technical Specifications:

Catalogue No. LabSmith510
Conductivity  
Range 0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
Accuracy ±1% F.S
Resolution 0.01, 0.1, 1
Calibration Points 1 to 3 points
Calibration Solutions 10µS/cm, 84µS/cm,1413µS/cm,12.88mS/cm,111.8mS/cm
TDS  
Range 0~100ppt (Max. 200ppt, depending on factor setting)
Accuracy ±1% F.S
TDS Factor 0.1~1.0 (Default 0.5)
Temperature  
Range 0~105°C, 32~221°F
Accuracy ±1°C
Resolution 0.1°C
Calibration Range Measured value ±10°C
Temperature Units °C or °F
Others  
Temperature Compensation 0~100°C, 32~212°F, Manual or Automatic
Temperature Coefficient 0.0~10.0%/°C
Cell Constant K=0.1, 1, 10 or User-defined
Normalization Temperature 25°C
Hold Function Manual or Automatic
Power Off Manual or Automatic (180 minutes after last key pressed)
Reset Function Yes
Connector 6-pin Mini Plug
Display LCD (135×75mm)
Power Requirements DC9V, using AC adapters,  220VAC/50Hz
Dimensions 210(L)×205(W)×75(H)mm
Weight 1.5kg

 

Accessories:

Catalogue No. Accessories
LabSmith510-S CON-1 Conductivity Electrode
TP-10K Temperature Probe
Conductivity Standard Solutions (84µS, 1413µS, 12.88mS)
DC9V Power Adapters
LabSmith510-DL CON-1 Conductivity Electrode
CON-0.1 Conductivity Electrode
Conductivity Standard Solutions (84µS, 1413µS, 12.88mS)
DC9V Power Adapters
LabSmith510-DH CON-1 Conductivity Electrode
CON-10 Conductivity Electrode
Conductivity Standard Solutions (84µS, 1413µS, 12.88mS)
DC9V Power Adapters
Additional Information

Additional Information

Code No
Reviews

JAINSONS (INDIA) REGD.Since 1957Serving Above 52 Countries

Information

Contacts

Jainsons (India) Regd.

Rampur Sarseri Road,
Azad Nagar, Ambala Cantt,
Haryana - 133001

Ph: +91-171-2972829
Flag Counter

Copyright Jainsons. All Rights Reserved