jainsonsindia partners
 Enquiry Cart

Ductless Fume Hoods

Code:

Ductless Fume Hoods

  • Safe and energy-saving mobile workspace free from toxic vapors and fumes without the need of costly ductwork.
  • with optional filter, work surface and stand

Performance

  • A variety of filters and work surfaces available to suit your specific experimental needs. (refer to accessory section)
  • High-quality polyester fiber pre-filter for trapping larger particles and increasing the life of the main HEPA filter.
  • Large-capacity blower maintaining sufficient intake flow rate and reducing noise. (less than 55 dB under normal operation)
  • Fluorescent light installed outside the workspace in order to prevent the airflow hindrance as well as the contamination while maintaining illumination intensity.

Convenience

  • Easy monitoring of the internal airflow speed thanks to built-in anemometer.
  • Comfortable front access to cartridge type of filters for easy replacement.
  • Built-in utility hole for easily routing the cords or wires of the equipment placed inside the hood.
  • Fully or half openable front door for convenient transport of experimental apparatuses and equipment into or out of the workspace.

Safety

  • Efficiency and capacity of activated carbon filters: BS 7989:2001
  • Structure, electrical outlet, lighting, and sound level: BS 7258-1:1994
  • Local smoke, large volume visualization, face velocity, and tracer gas: ANSI/ASHRAE 110-1995 and NF EN 14175-1
Model LSDLH-01G LSDLH-11G
Controller Microprocessor control
Face velocity Initial set point: 0.4m/s, 80fpm
Air flow meter Swing vane type
Main filter Chemical Filter (optional 6 different filters)
Pre filter Washable high efficiency nylon filter
Materials Main body, window (front / side) 2.0mm steel (epoxy powder-coated), 8mm / 6mm thick acrylic resin
Work surface Optional 6 different work surfaces
Fluorescent light intensity > 600lux
Noise level 55dB under normal operation
Dimension(W×D×H) Interior (mm / inch) 880×640×800 / 34.6×25.2×31.5 1180×640×800 / 46.5×25.2×31.5
Exterior without stand (mm / inch) 900×660×1250 / 35.4×26×49.2 1200×660×1250 / 47.2×26×49.2
Exterior with stand (mm / inch) 900×660×1985 / 35.4×26×78.1 1200×660×1985 / 47.2×26×78.1
Net weight (body) (kg / lbs) 100 / 220.5 118 / 260.1
Net weight (body + stand) (kg / lbs) 120 / 264.6 140 / 308.6
Electrical  requirements (230V) 50Hz, 0.6A 60Hz, 0.7A 50Hz, 0.6A 60Hz, 0.7A

 

Description

Details

Ductless Fume Hoods

  • Safe and energy-saving mobile workspace free from toxic vapors and fumes without the need of costly ductwork.
  • with optional filter, work surface and stand

Performance

  • A variety of filters and work surfaces available to suit your specific experimental needs. (refer to accessory section)
  • High-quality polyester fiber pre-filter for trapping larger particles and increasing the life of the main HEPA filter.
  • Large-capacity blower maintaining sufficient intake flow rate and reducing noise. (less than 55 dB under normal operation)
  • Fluorescent light installed outside the workspace in order to prevent the airflow hindrance as well as the contamination while maintaining illumination intensity.

Convenience

  • Easy monitoring of the internal airflow speed thanks to built-in anemometer.
  • Comfortable front access to cartridge type of filters for easy replacement.
  • Built-in utility hole for easily routing the cords or wires of the equipment placed inside the hood.
  • Fully or half openable front door for convenient transport of experimental apparatuses and equipment into or out of the workspace.

Safety

  • Efficiency and capacity of activated carbon filters: BS 7989:2001
  • Structure, electrical outlet, lighting, and sound level: BS 7258-1:1994
  • Local smoke, large volume visualization, face velocity, and tracer gas: ANSI/ASHRAE 110-1995 and NF EN 14175-1
Model LSDLH-01G LSDLH-11G
Controller Microprocessor control
Face velocity Initial set point: 0.4m/s, 80fpm
Air flow meter Swing vane type
Main filter Chemical Filter (optional 6 different filters)
Pre filter Washable high efficiency nylon filter
Materials Main body, window (front / side) 2.0mm steel (epoxy powder-coated), 8mm / 6mm thick acrylic resin
Work surface Optional 6 different work surfaces
Fluorescent light intensity > 600lux
Noise level 55dB under normal operation
Dimension(W×D×H) Interior (mm / inch) 880×640×800 / 34.6×25.2×31.5 1180×640×800 / 46.5×25.2×31.5
Exterior without stand (mm / inch) 900×660×1250 / 35.4×26×49.2 1200×660×1250 / 47.2×26×49.2
Exterior with stand (mm / inch) 900×660×1985 / 35.4×26×78.1 1200×660×1985 / 47.2×26×78.1
Net weight (body) (kg / lbs) 100 / 220.5 118 / 260.1
Net weight (body + stand) (kg / lbs) 120 / 264.6 140 / 308.6
Electrical  requirements (230V) 50Hz, 0.6A 60Hz, 0.7A 50Hz, 0.6A 60Hz, 0.7A

 

Additional Information

Additional Information

Code No
Reviews