jainsonsindia partners
sales@jainsonsindia.com    +91-9896353519    
 Enquiry Cart
≡MENU

THERMAL CONDUCTIVITY OF INSULATING SLAB

THERMAL CONDUCTIVITY OF INSULATING SLAB

More Views

THERMAL CONDUCTIVITY OF INSULATING SLAB

Code: 
DESCRIPTION:
The set-up is designed to determine thermal conductivity of insulating materials in the form of slab. The apparatus consists of main central heater and ring guard heater, sandwiched between the specimens. Cooling plates are provided on either side of the specimen. Two identical specimens are clamped between heater that ensures unidirectional heat flow through specimen. The whole assembly is kept in chamber and insulated by ceramic wool insulation around the set-up.
 
EXPERIMENTATION: 
  • Determination of thermal conductivity of insulating material in the form of slab.
  • Study of variation of thermal conductivity of the material with temperature.
UTILITIES REQUIRED:
  •  Water supply 5 lit/min (approx.)
  •  Floor Drain.
  •  Electricity Supply: 1 Phase, 220 V AC, 2 Amp.
  •  Table for set-up support.
TECHNICAL DETAILS:
Specimen
Diameter 180 mm (approx).
Thickness 12 mm (approx).
Central Heater Dia 100 mm, sandwiched between copper plates.
Ring Guard Heater Width 35 mm, sandwiched between copper rings.
Cooling chamber  Made of Aluminum for water circulation
Insulation Ceramic wool
Control panel comprising of
Digital Voltmeter 0-300 Volt.
Digital Ammeter 0-2 Amp
Variac 0-230 V, 2 Amp, (2 Nos.) One each for central & ring guard heater.
Digital Temp. Indicator 0199.9°C, with multi-channel switch
Temperature Sensors RTD PT-100 type-6Nos.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint. 
 
Ordering Details:
Catalogue No Description
JIHT-032 THERMAL CONDUCTIVITY OF INSULATING SLAB 
 
Description

Details

DESCRIPTION:
The set-up is designed to determine thermal conductivity of insulating materials in the form of slab. The apparatus consists of main central heater and ring guard heater, sandwiched between the specimens. Cooling plates are provided on either side of the specimen. Two identical specimens are clamped between heater that ensures unidirectional heat flow through specimen. The whole assembly is kept in chamber and insulated by ceramic wool insulation around the set-up.
 
EXPERIMENTATION: 
  • Determination of thermal conductivity of insulating material in the form of slab.
  • Study of variation of thermal conductivity of the material with temperature.
UTILITIES REQUIRED:
  •  Water supply 5 lit/min (approx.)
  •  Floor Drain.
  •  Electricity Supply: 1 Phase, 220 V AC, 2 Amp.
  •  Table for set-up support.
TECHNICAL DETAILS:
Specimen
Diameter 180 mm (approx).
Thickness 12 mm (approx).
Central Heater Dia 100 mm, sandwiched between copper plates.
Ring Guard Heater Width 35 mm, sandwiched between copper rings.
Cooling chamber  Made of Aluminum for water circulation
Insulation Ceramic wool
Control panel comprising of
Digital Voltmeter 0-300 Volt.
Digital Ammeter 0-2 Amp
Variac 0-230 V, 2 Amp, (2 Nos.) One each for central & ring guard heater.
Digital Temp. Indicator 0199.9°C, with multi-channel switch
Temperature Sensors RTD PT-100 type-6Nos.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint. 
 
Ordering Details:
Catalogue No Description
JIHT-032 THERMAL CONDUCTIVITY OF INSULATING SLAB 
 
Additional Information

Additional Information

Code No
Reviews

JAINSONS (INDIA) REGD.Since 1957Serving Above 52 Countries

Information

Contacts

Jainsons (India) Regd.

Rampur Sarseri Road,
Azad Nagar, Ambala Cantt,
Haryana - 133001

Ph: +91-171-2972829
Flag Counter

Copyright Jainsons. All Rights Reserved