jainsonsindia partners
sales@jainsonsindia.com    +91-9896353519    
 Enquiry Cart
≡MENU

Specific Purpose Chambers

Specific Purpose Chambers

More Views

Specific Purpose Chambers

Code: 
Specific Purpose Chambers 
Specially designed for processes requiring clean and controlled environmental test conditions. (ISO class 5 air cleanliness as per ISO 14644-1)
Performance
  • Microprocessor PID control / Temperature calibration / Automatic tuning.
  • Exhaust duct is located at the upper right side of the unit to avoid influence other devices.
  • Built-in differential pressure gauge for easy observation of HEPA filter condition.
Convenience
  • Silicone-free construction for clean environment.
  • Corrosion resistance stainless steel chamber.
  • Maintenance of water supply are easily performed with a front water tank.
     - Water level check indicated by water level bar in the tank.
  • Water supply during operation is also available for long term test purposes.
  • Direct water system provides user great convenience when performing long-term tests. (optional)
  • Clear observation of samples.
     - Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.
     - Inner glass door with entry ports for handling samples without affecting inner chamber temperature and humidity. (optional)
  • Cable port for introduction of external probes or wires.
     - 50mm diameter cable port comes standard on the left side of the unit.
     - Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)
  • Casters for easy mobility during installation or relocation.
  • User friendly LCD controller.
     -5.7 inch colorful interactive touch type LCD controller.
     - Set value and present value are clearly visible together on display.
     - Operating progress visible in graph mode allow for direct data interpretation.
     - Temperature and other operating parameters recorded with use of selectable recorder. (optional)
     - Sufficient programmable control support.
     - Programming operation.
Description LSTH-CR
Programmable pattern capacity 120
pattern repeat time 999
Max. Segments per a pattern 100
Available max. segments* 1200
Programmable process time per a segment 0 to 99 hr. 59 min. 
  • * Even though the max. segments per a pattern are 100, available total segments are up to 1200 not 12000, so you need to arrange the number of segment and patterns properly.
  • Computer interface.
     - RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
     - Program patterns are simple to set with the use of our software.
     - Storage of program information, backup of value settings, recovery, temperature, humidity values.
     - RS-232 communication port comes standard
Safety Features
  • Automatic shut off after overheat alarm.
  • Low and empty water level alarm.
  • Power supply leakage breaker.
  • Over current protection.
  • Open door alarm.
Model LSTH-CR-270
Chamber volume (L / cu ft) 270 / 9.5
Controller Programmable, Touch screen type controller (5.7” color monitor)
Local controller (fixed - command control)
Temperature Range (℃ / ℉) -35 to 100 / -31 to 212 without humidity
20 to 85 / 104 to 185 with humidity
Fluctuation 1) (±℃ / ℉) at 40℃ / 60%RH 0.5 / 0.9
Variation 1) (±℃ / ℉) at 40℃ / 60%RH 0.5 / 0.9
Time Heating - without humidity (min.) 60 from -35℃ to 120℃ (-31℉ to 248℉)
Cooling - without humidity (min.) 65 from 20℃ to -35℃ (68℉ to -31℉)
Humidity Range (%RH) 30 to 90
※ See page 234 for more detailed humidity range check.
Fluctuation 1) (±%RH) at 60%RH / 40℃ 3
Variation 1) (±%RH) at 60%RH / 40℃ 3
Cleanliness Class 100 (ISO 14644-1)
Refrigeration System Mechanical single stage refrigerator system (air-cooled condenser)
Refrigerant R-404A
Water supply Capacity 15L (0.53cu ft) - Cartridge type
Water quality pH6.2 to 7.2 / Electrical conductivity 20㎲ /cm to below
No. of wire shelves (standard / max.) 2 / 10
Distance of between shelves (mm / inch) 40 /1.6
Max. load per shelf (kg / lbs) 25 / 55.1
Permitted total load (kg / lbs) 65 / 143.3
Dimension (W×D×H) Interior (mm / inch) 600×700×648 / 23.6×27.6×25.4
Exterior (mm / inch) 1180×1120×1935 / 46.5×44.1×76.2
Viewing windows (mm / inch) 200×330 / 7.9×13
Net weight (kg / lbs) 400±10 / 881.8±22
Cable port Basically one hole provided / Ø 50mm (2”)
Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2”)
Interface port Basically RS-232C [RS-485-optional]
Electrical requirements (230V, 1ph) 60Hz / 29A 50Hz / 29A 
  • 1) Technical data according to DIN 12880, IEC 60068.
※ Permissible environmental conditions: temperature (18 to 30℃) and relative humidity (up to 85%).
 ※ All specifications are under ambient temperature 20℃ (68℉), No load.
Description

Details

Specific Purpose Chambers 
Specially designed for processes requiring clean and controlled environmental test conditions. (ISO class 5 air cleanliness as per ISO 14644-1)
Performance
  • Microprocessor PID control / Temperature calibration / Automatic tuning.
  • Exhaust duct is located at the upper right side of the unit to avoid influence other devices.
  • Built-in differential pressure gauge for easy observation of HEPA filter condition.
Convenience
  • Silicone-free construction for clean environment.
  • Corrosion resistance stainless steel chamber.
  • Maintenance of water supply are easily performed with a front water tank.
     - Water level check indicated by water level bar in the tank.
  • Water supply during operation is also available for long term test purposes.
  • Direct water system provides user great convenience when performing long-term tests. (optional)
  • Clear observation of samples.
     - Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.
     - Inner glass door with entry ports for handling samples without affecting inner chamber temperature and humidity. (optional)
  • Cable port for introduction of external probes or wires.
     - 50mm diameter cable port comes standard on the left side of the unit.
     - Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)
  • Casters for easy mobility during installation or relocation.
  • User friendly LCD controller.
     -5.7 inch colorful interactive touch type LCD controller.
     - Set value and present value are clearly visible together on display.
     - Operating progress visible in graph mode allow for direct data interpretation.
     - Temperature and other operating parameters recorded with use of selectable recorder. (optional)
     - Sufficient programmable control support.
     - Programming operation.
Description LSTH-CR
Programmable pattern capacity 120
pattern repeat time 999
Max. Segments per a pattern 100
Available max. segments* 1200
Programmable process time per a segment 0 to 99 hr. 59 min. 
  • * Even though the max. segments per a pattern are 100, available total segments are up to 1200 not 12000, so you need to arrange the number of segment and patterns properly.
  • Computer interface.
     - RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
     - Program patterns are simple to set with the use of our software.
     - Storage of program information, backup of value settings, recovery, temperature, humidity values.
     - RS-232 communication port comes standard
Safety Features
  • Automatic shut off after overheat alarm.
  • Low and empty water level alarm.
  • Power supply leakage breaker.
  • Over current protection.
  • Open door alarm.
Model LSTH-CR-270
Chamber volume (L / cu ft) 270 / 9.5
Controller Programmable, Touch screen type controller (5.7” color monitor)
Local controller (fixed - command control)
Temperature Range (℃ / ℉) -35 to 100 / -31 to 212 without humidity
20 to 85 / 104 to 185 with humidity
Fluctuation 1) (±℃ / ℉) at 40℃ / 60%RH 0.5 / 0.9
Variation 1) (±℃ / ℉) at 40℃ / 60%RH 0.5 / 0.9
Time Heating - without humidity (min.) 60 from -35℃ to 120℃ (-31℉ to 248℉)
Cooling - without humidity (min.) 65 from 20℃ to -35℃ (68℉ to -31℉)
Humidity Range (%RH) 30 to 90
※ See page 234 for more detailed humidity range check.
Fluctuation 1) (±%RH) at 60%RH / 40℃ 3
Variation 1) (±%RH) at 60%RH / 40℃ 3
Cleanliness Class 100 (ISO 14644-1)
Refrigeration System Mechanical single stage refrigerator system (air-cooled condenser)
Refrigerant R-404A
Water supply Capacity 15L (0.53cu ft) - Cartridge type
Water quality pH6.2 to 7.2 / Electrical conductivity 20㎲ /cm to below
No. of wire shelves (standard / max.) 2 / 10
Distance of between shelves (mm / inch) 40 /1.6
Max. load per shelf (kg / lbs) 25 / 55.1
Permitted total load (kg / lbs) 65 / 143.3
Dimension (W×D×H) Interior (mm / inch) 600×700×648 / 23.6×27.6×25.4
Exterior (mm / inch) 1180×1120×1935 / 46.5×44.1×76.2
Viewing windows (mm / inch) 200×330 / 7.9×13
Net weight (kg / lbs) 400±10 / 881.8±22
Cable port Basically one hole provided / Ø 50mm (2”)
Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2”)
Interface port Basically RS-232C [RS-485-optional]
Electrical requirements (230V, 1ph) 60Hz / 29A 50Hz / 29A 
  • 1) Technical data according to DIN 12880, IEC 60068.
※ Permissible environmental conditions: temperature (18 to 30℃) and relative humidity (up to 85%).
 ※ All specifications are under ambient temperature 20℃ (68℉), No load.
Additional Information

Additional Information

Code No
Reviews

JAINSONS (INDIA) REGD.Since 1957Serving Above 52 Countries

Information

Contacts

Jainsons (India) Regd.

Rampur Sarseri Road,
Azad Nagar, Ambala Cantt,
Haryana - 133001

Ph: +91-171-2972829
Flag Counter

Copyright Jainsons. All Rights Reserved