Temperature & Humidity Chambers

The best choice for the limited laboratory space! Tabletop chamber is beneficial for space efficiency.

Control range

• Temperature range from 0 to 120°C

   Humidity range from 30 to 95% RH 

Performance

• Microprocessor PID control / Temperature calibration / Automatic tuning.

• Uniform temperature and humidity control guarantees reliable test result.

• Air-tight door closure with perfect sealed packing.

   - Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.

• Maintenance of water supply is easily performed.

   - Water level condition is easy to check by the water level indicator on the front control panel.

• Water supply during operation is also available for long term test purposes.

• Direct water system provides user great convenience when performing long-term tests. (optional)

Safety

• Built in door lock with a key.

• Automatic shut off after overheat alarm.

• Low and empty water level alarm.

• Power supply leakage breaker.

• Over current protection.

• Open door alarm.

Convenience

• Compact design and quite operation.

• Three different size models are available to suit user’s need.

• Corrosion resistance stainless steel chamber.

• Operating condition is clearly noticed by front LED indicator.

   - Three different colored lights show each status of running, stop, and power off condition.

• Clear observation of samples.

   - Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.

• Cable port for introduction of external probes or wires.

   - 50mm diameter cable port comes standard on the left side of the unit.

   - Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)

• Two type of stands for space-saving. (optional)

   - Single stand with a drawer provides enough storage space.

   - Two step stand accepts loading two units to save limited space.

• User friendly LCD controller.

   - Colorful interactive touch type LCD controller.

   - Set point temperature and present temperature are clearly shown together on display.

   - Sufficient programmable control support.

   - Operating progress can be shown in graph mode for better data understanding.

   - Automatic start/stop can be programmed for unattended operations.

   - Display indicates abnormal temperature changes or power failures.

   - Selective bilingual language support. 

   (Korean / English or English / Chinese, selectable only when placing an order)

   - Temperature and other operating parameters can be recorded using a six channel digital recorder.(optional)

• Computer interface.

   - RS-485 communication port (optional) enables connection up to maximum 32 units. Simultaneous monitoring and operating of multiple units is an available feature.

   - Program patterns are simple to set with the use of our software.

   - Easy to check status of real-time operations. Graph data supports easy understanding.

   - Storage and documentation of programs.

   - Data with saving capabilities in excel and text format.

   - Storage of program information, backup of value settings, recovery, and temperature values.

   - RS-232 communication port as standard offer.

* Even though the max. segments per pattern are 100, the total available segments are up to 6000 not 10000, therefore arrangement of the number of segment and patterns will need to be done properly.

1) Technical data according to DIN 12880, IEC 60068.

※ Permissible environmental conditions: temperature (18 to 30℃) and relative humidity (up to 85%).
 ※ All specifications are under ambient temperature 20℃ (68℉), No load.