Multi Parameter Patient Monitor

Code:

Multi Parameter Patient Monitor

Features :

12.1” Colour TFT LCD display with
waveforms upto 8 Channels
Portable , streamline handle designPortable , streamline handle design
Monitor measures from Adult to Neonates
easurement of one channel ECG anytime, anywhere you like
Display of ECG waveform, heart rate, analysis results and battery status on the backlit LCD
Measurement results transmission to PC by USB mode
Auto power-off while no key is pressed in 30 seconds
Auto-evaluation based on detected heart data
Dual measuring modes
2 batteries can take at least 500 times measurement
Data Review freely

ECG

5-lead or 12-lead selectable
Input: 5-lead: RA; LA; RL; LL; V or R; L; N; F; C
Lead selection: I; II; III; avR; avL; avF; Vx; CAL
Gain selection:×0.25,×0.5,×1,×2,auto
Sweep speed: 12.5mm/s, 25mm/s, 50mm/s
Accuracy: ±1bpm or ±1%, whichever is greater
Protection: Withstand 4000V AC/50Hz voltage in isolation against electrosurgical and defibrillation
Calibration signal: 1mV±5%
Operation modes: Diagnostic, Monitor, Surgery
Heart rate range: Adult: 15-300bpm Paediatric/ Neonatal: 15-350bpm
2 batteries can take at least 500 times measurement
Measurement range: -2.0mV~2.0mV
S-T detection: YES, Arrhythmia analysis: YES
Alarm: YES, audible and visual alarm, alarm events recallable

NIBP

Method: Oscillometry
Operation modes: Manual/Automatic/STAT
Measurement unit: mmHg/KPa selectable
Gain selection:×0.25,×0.5,×1,×2,auto
Measurement types: Systolic, Diastolic, Mean
Measurement range: Adult: 10-270mmHg
Over-pressure protection: YES
Resolutionl: 1mmHg
Accuracy: The mean error shall be less than ±5 mmHg ,the standard deviation shall be less than ±8mmHg
Alarm: Systolic,Diastolic,Mean

SPO2

Respiration

Temperature

IBP

* Specification of JFPO-80 and JFPO-90 are same

Catalogue No

JFPO-80 & JFPO-90

Write Your Own Review