Pasteurization Unit Continuous JMSMP 500 LPH

Pasteurization Unit Continuous JMSMP 500 LPH The plate pasteurization unit is well suited for pasteurization of Milk STANDARD DESIGN1.Balance Tank is stainless steel, inside and outside polished, equipped with S.S. Float and loose cover.2.Stainless steel centrifugal pump for product, complete with electrical motor.3.Plate heat exchanger with frame cladded with stainless steel. The plate pack is clamped between frame head and follower by means of stainless steel tie bars placed along the edge of the Frame.4.External Holding time : 20 seconds.5.Stainless steel electrical water heating set6.Set of temperature regulating equipment consisting of Control panel for controlling and recording of the pasteurization and outlet Temperature.7.Set of internal stainless steel pipes, fittings and base frame for Mounting of the equipment. The equipment is assembled on base frame and tested in our factory.

Capacity : 

• 200 LPH - 1000 LPH

Models :

• JMSMP9 - Pasteurization Unit Continuous (with Hot Water Generator)
• JMSMP9H - Pasteurization Unit Continuous (with Steam Mixing Battery)

Features :

• Inbuilt stainless steel electrical water heating set in JMSMP9 model.
• Set of temperature regulating equipment consisting of Control Panel for controlling & recording of the pasteurization and outlet temperature.
• JMSMP9 model is provided with an electrical water heater, thus it can be used, where steam or hot water isn't available.
• This unit is used for pasteurization of milk and cream, but is also applicable for other products.
• Balance Tank is made of stainless steel, polished inside & outside, equipped with S.S. Float & lose cover.
• Stainless steel centrifugal pump for product, complete with electrical motor.
• Plate Heat Exchanger with frame cladded with stainless steel. The Plate pack is clamped between frame head and follower by means of stainless steel tie bars placed along the edge of the frame.

• External Holding Time : 20 Seconds; Pasteurization Temp: 73° C / 83° C.
• Set of internal stainless steel pipes, fittings, and base frame for mounting of the equipment.
• Unit Consists of :- Receiving tank, Inline Filter, Plate Heat Exchanger, Control Panel, Holding Tubes, Flow Controller, Flow Direction Valve, Hot Water Pump, Hot Water Generator/Steam Mixed Battery.