Temp. & Humid. Chambers

Standard environmental test chamber. Highly interactive LCD controller, beneficial for sophisticated long-term test cycles.

Control range

• Temperature range from -40 to 150°C Humidity range from 25 to 95% RH

Performance

• Microprocessor PID control / Temperature calibration / Automatic tuning.

• Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.

• Water recycling and filtering system reduce water consumption for longer operation.

• Air-tight door closure with perfect sealed packing.

   - Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.

   - Two-point door latch also enhances tightness to door closure.

• Energy efficiency is achieved by optimization of the insulation system.

   - Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃.

Safety

• Built in door lock with a key.

• Automatic shut off after overheat alarm.

• Low and empty water level alarm.

• Power supply leakage breaker.

• Over current protection.

• Open door alarm.

Convenience

• Spacious chamber volume with a maximum capacity of 1500L.

   - Various volume sizes, available to suit any users’ need.

• Corrosion resistance stainless steel chamber and electric polished humidification tank.

• Maintenance of water supply are easily performed with a front water tank.

   - Portable water container makes supplying water convenient.

• Water supply during operation is also available for long term test purposes.

• Direct water system provides user great convenience when performing long-term tests. (optional)

• Clear observation of samples.

   - Tempered glass door with built in heating wire.

   - Energy efficient, long life span LED lighting.

   - Wider view, inner glass door is available for monitoring of samples. (optional)

• Cable port for introduction of external probes or wires.

   - 50mm diameter cable port comes standard on the left side of the unit.

   - Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)

• Casters for easy mobility during installation or relocation.

• User friendly LCD controller.

   - 5.7 inch colorful interactive touch type LCD controller.

   - Set value and present value are clearly visible together on display.

   - Operating progress visible in graph mode allow for direct data interpretation.

   - Built-in SD card drive.

   - Trilingual support. (English / Chinese / Korean)

   - Temperature and other operating parameters recorded with use of selectable recorder. (optional)

   - Sufficient programmable control support.

• * Even though the max. segments per a pattern are 100, available total segments are up to 1200 not 12000, so you need to arrange the number of segment an patterns properly.

• Computer interface.

   - RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)

   - Program patterns are simple to set with the use of our software.

   - Storage of program information, backup of value settings, recovery, temperature, humidity values.

   - RS-232 communication port comes standard.

1) Technical data according to DIN 12880, IEC 60068.
 ※ Permissible environmental conditions: temperature (18 to 30℃) and relative humidity (up to 85%).
 ※All specifications are under ambient temperature 20℃ (68℉), No load