| Model |
LSRMHT-201 |
LSRMHT-202 |
| Switch Type of Objective Lens & Indenter |
Auto Turret(Objective Lens Indenter Objective Lens) |
| Testing Force |
|
lOg (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N) |
| Scale |
|
HVO.01, HVO.025, HVO.05, HVO.1, HVO.2, HVO.3, HVO.5, Hv1, HV2 |
| Conversion Scale |
|
HRA, HRB, HRC, HRD, HRF, HBW, H15N, H3ON, H45N, H15T, H30T, H45T |
Not Available |
| Min. Measuring Unit |
|
0.01p.m |
0.25pm |
| Hardness Value Range |
|
1HV-4000HV |
| Hardness Value of Reading |
|
Digital LCD Screen |
| Total Magnification ofMicroscope |
|
100X (For Observation) and 400X (For Measurement) |
| Loading Method |
|
Automatically (Load, Dwell and Unload the Testing Force) |
| Dwell TimeMax. Height Allowed |
|
1-99s 85mm |
| Throat Depth |
|
110mm |
| Instrument Size/Weight |
|
450x290x480mm(LxWxH)/45Kg |
| Light Source |
|
LED Cold Light Source (Can be continuous use for 24 hours, servicing life can reach 100,000 hours) |
| Power Supply |
|
110V/220V + 5%, 50/60Hz |
| X-Y Testing Table |
|
DIM: 100x100mm, Max. Travel Range :25x25mm,Moving Resolution Ratio : 0.01mm Analogue (Digital Optional) |
| Data Output |
|
Built-in Printer (Hardness Value, The Max. & Min Value, Testing Times and Average Value) Built-in RS-232 interface |
| Standard Accessories |
|
10X Digital Micro Eyepiece; 10X & 40X Objectives: Vickers Indenter, X-Y Testing Table : Flat Fixture, Thin Fixture, Small Parts Fixture, Level Bubble Vail, Power Cable, Dust-Proof Cover, Instruction Book,Warranty Card, Accessory Case 2 Pieces : Standard Block of Hardness 4 Pieces : Horizontal Adjusting Screw |
| Optional Accessories |
|
Image Analysis Software, Metallographic Structure Device, 15X Micrometer eyepiece, Objective : 20X Objective,60X Objective |
| |
|
|
|
|
