PolyVENT Filter
PolyVENT are integral filter products for sterile venting of vessels and tanks.
- Membrane made of hydrophobic 0.2 µm PTFE membrane.
- Validated for 50 steam autoclave cycles; compatible with EtO.
- Testable by Water Break Through (WBT) test or bubble point testing.
- Pass USP Class VI biosafety tests for plastics.
- Manufactured in clean room facilities.
- Bidirectional and autoclavable.
These devices are constructed from a single, standardized set of materials PTFE membranes and polypropylene housing to simplify the approval process.
Specifications:
- Pore Size: 0.2 µm
- Filtration Media: Polytetrafluoroethylene (PTFE)
- Housing: Polypropylene (PP)
- Vent: On inlet
- Support System: Polypropylene (PP)
- Sterilization: Can be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving. Compatible with EtO sterilization.
- Non-Pyrogenic: non-reactive
- Operating Pressure Max.: 2 bar - forward direction (29 psi - forward direction)
- Sealing: Heat-fused
- Flow Direction: Bidirectional
Ordering Information:
| Cat. No. |
Description |
Qty |
| 6713-0425 |
PolyVENT 4 Filter |
50/pk |
| 6713-1075 |
PolyVENT 1000 Filter |
1/pk |
| 6713-1650 |
PolyVENT 16 Filter |
10/pk |
| 6713-1651 |
PolyVENT 16 Filter |
100/pk |
| 6713-5036 |
PolyVENT 500 Filter |
1/pk |
