We are one of the trusted suppliers of CRO 20MHz Dual Channel to our highly valued clients. This is used in varied industries to cater to the requirements of different clients. It is sturdily constructed using best quality raw material at our unit using ultra modern machinery in compliance with the industrial prevailing norms and standards. CRO 20MHz Dual Channel go through various tests to ensure that no compromise is done with their quality at any stage. They are available at affordable prices.
Features :
- DC ~ 20MHz
- Dual channel, X Y mode
- 6" display cathode ray tube, sensitivity triggering up to 1mV/division
- TV synchronous separation circuit to observe stable TV signal
- Polarity reversal, CH 1Sync output
Technical Specifications :
- CRT : 6" Rectangular screen with internal graticule,
- 8 x 10 Div (1Div=1cm)
Vertical Deflection
| Vertical Operation Mode |
CH1, CH2, ADD, ALT,CHOP (CH1, CH2) |
| Sensitivity |
5mV/div to 5V/div +3%,1mV/div to 1V/div +5% (x5),10 steps |
| Rise time |
<17.5ns |
| Input impedance |
1Mohm |
| Max. Input voltage |
250V (DC+AC peak value) at 1kHz (250V, DC+AC) |
| Input coupling |
AC, DC, GND |
| Polarity selection |
+(CH2 only) |
| Display mode |
1, 10, X-Y |
Horizontal Deflection
| Sweep time |
0.2micros/div to 0.2s/div |
| Sweep expansion |
x10 |
| Accuracy |
3% |
Trigger System
| Triggering mode : |
Auto, NORM, TV-V, TV-H |
| Trigger source |
VERT,CH1, LINE, EXT |
| Sensitivity auto |
20Hz~20MHz(VERT) |
| Frequency norm |
0.5div INT, 0.5Vp-p EXT |
| TV-H |
At least 1div or 1Vp-p |
| Input impedance |
1M ohm |
| X-Y Phase Difference |
<3O, DC-50KHz |
| Calibration waveform |
Frequency: 1kHz 20%, Voltage: 0.5V 1% |
| Power requirement |
220 VAC +10% , 50 Hz |
| Weight |
8.0Kg Approx. |
| Dimensions (mm) |
310 (L) x370(B) x 130(H) |
Standard Accessories:
Power cable, Probe - 2Nos., Instruction manual
Ordering Details:
| Catalogue No. |
Description |
| LTM-5025 |
CRO 20MHz Dual Channel |
