Owing to our rich industrial experience, we have been a well established manufacturer of CRO 30MHz Dual Channel with frequency Counter to our highly esteemed clients. It is made specifications to cater to the varied requirements of customers. We procure it from our dependable vendors who serve us only with flawless quality CRO 30MHz Dual Channel with frequency Counter. It thus stands high on durability, quality, performance, low maintenance and has a long life. This has gained us high rising demands in the market.
Features:
- 30MHz
- Inbuilt 6 Digit seven segment display frequency Counter
- Dual channel, X Y mode
- 6" display cathode ray tube, sensitivity triggering up to 1mV/division
- TV synchronous separation circuit to observe stable TV signal
- Polarity reversal, CH 1Sync output
Technical Specifications:
- CRT : 6” Rectangular screen with internal graticule,
- 8 x 10 Div (1Div=1cm)
Vertical Deflection
Vertical Operation Mode |
CH1, CH2, ADD, ALT, CHOP (CH1, CH2) |
Sensitivity |
5mV/div to 5V/div +3%, 1mV/div to 1V/div +5% (x5),10 steps |
Rise time |
<17.2ns |
Input impedance |
1Mohm |
Max. Input voltage |
250V (DC+AC peak value) at 1kHz (250V, DC+AC) |
Input coupling |
AC, DC, GND |
Polarity selection |
+(CH2 only) |
Display mode |
1, 10, X-Y |
Horizontal Deflection
Sweep time |
0.2micros/div to 0.2s/div |
Sweep expansion |
x10 |
Accuracy |
3% |
Trigger System
Triggering mode |
Auto, NORM, TV-V, TV-H |
Trigger source |
VERT,CH1, LINE, EXT |
Sensitivity auto |
20Hz~30MHz(VERT) |
Frequency norm |
0.5div INT, 0.5Vp-p EXT |
TV-H |
At least 1div or 1Vp-p |
Input impedance |
1M ohm |
X-Y Phase Difference |
<3O, DC-50KHz |
Calibration waveform |
Frequency: 1kHz 20%, Voltage: 0.5V 1% |
Power requirement |
220 VAC +10% , 50 Hz |
Weight |
8.0Kg Approx. |
Dimensions (mm) |
310 (L) x370(B) x 130(H) |
Standard Accessories:
Power cable, Probe - 2Nos., Instruction manual
Ordering Details:
Catalogue No. |
Description |
LTM-5030 |
CRO 30MHz Dual Channel with frequency Counter |