We are a reputed supplier of PLC Trainer to our highly reputed clients. It is precisely fabricated using best quality raw material and hi tech machinery at our unit under the expert supervision and guidance. It is tested on various parameters to make sure that PLC Trainer stands up to the prevailing global norms and standards. We have gained huge appreciation from our clients for its quality, effectiveness, low maintenance, durability and sturdiness. We strive to deliver it on time.

Features:

• Input switches (16) - 13 Nos. of toggle switches, and 3 Nos of push to on switches for input data to PLC.

• Output - 8 nos. of output shown by LED and terminals also provided.

• Connectors - Connector facilities is also given for Input and output data

Technical Specification

• Description: Specification : Delta

• Power Supply Voltage 100-240V AC (-15%~10%), 50/60Hz

• Connector European standard removable terminal block (pin pitch:5mm)

• Operation DVP24ES2 start to run when the power rises to 95~100VAC and stops when the power drops to 70VAC. if the power is suddenly cut off, the MPU will continue running for 10ms.

• Power consumption 30VA

• DC 24V current output 500mA

• Power Supply Protection: DC 24V output short circuit protection.

• Voltage withstand 1,500VAC (primary-secondary), 1,500VAC(primary-PE),500VAC (secondary-PE)

• Insulation resistance 5 M Ohm. at 500VDC(between all 1/0 points and ground)

• NOISE IMMUNITY ESD: 8KV Air Discharge

• EFT: Power line: 2KV, Digital1/0: 1KV, Analog &communication 1/0: 1KV

• RS: 26MHz~1GHz, 10V/m

• Grounding The diameter of grounding wire shall not be less than that of L, N terminal of the power supply.

• Environment Operation: 0 degree to 55 degree C (temperature), 50`95% (humidity), pollution degree 2 storage: -25 degree C to 70 degree C (temperature), 5~95% (humidity)

Optional Ready to use Modules applications for above PLC Trainer

• ME PLC A Module for Traffic Light Control using PLC.

• ME PLC B Module for DOL Starter using PLC.

• ME PLC C Module for Star Delta Starter using PLC.

• ME PLC D Module For Conveyer Belt Control.

• ME PLC E Module for Motor start and stop operation using Timers, Counters and Motor Forward & Reverse direction control using PLC.

• ME PLC F Module for DOL & Star Delta Starter using PLC.

• ME PLC G Module for Water Level Control using PLC.

• ME PLC H Module for Temperature Control using PLC.

• ME PLC I Module for Sequence Control System using PLC.

• ME PLC J Module for Elevator Control using PLC.

Ordering Details: