DESCRIPTION :
The present set-up is designed to study the working principle and calibration procedure of P/I converter and I/P converter. Air pressure is given to both by compressed air output generated by the both converter is observed and measured. P/I converter accepts the pressure input 0-1 bar and gives output 4-20 mA DC accordingly, which can be measured using Digital Current Source/Meter. And in case of I/P converter, the current input of 4-20 mA DC is given to I/P Converter by Digital Current Source/Meter and output response in 3-15 PSIG is observed and measured by Bourdon type Pressure Gauge.
The set-up is self contained with Air pressure regulator, pressure gauges and necessary piping. All component and accessories are properly mounted on the rigid MS structure and fitted on a base plate to form a table top set-up.
EXPERIMENTATION:
- To study of working principle and calibration procedure of I/P converter.
- To study of working principle and calibration procedure of P/I converter
- To study of linearity, hysteresis, accuracy and repeatability of I/P and P/I Converter.
UTILITIES REQUIRED :
- Electricity Supply : Single Phase, 220 V AC, 50 Hz, 5 Amp.
- Table for setup support
- Compressed air supply @ 2CFM at 2 Kg/cm2 pressure
TECHNICAL DETAILS:
| I/P Converter |
Input : 4-20 mA DCOutput : 3-15 PSIG |
| Pressure Gauge |
Bourdon type 0-2 kg/cm2 |
| P/I Converter |
Input : 0 - 1 barOutput : 4-20 mA DC |
| Digital Current Source/Meter |
Digital Indication of Current input and output.Range 0-20 mA DC |
| Pressure Regulator |
0-2 kg/cm2 |
| Piping |
Size ¼”. |
| An ENGLISH instruction manual will be provided along with the Apparatus |
| The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint. |
Ordering Details:
| Catalogue No |
Description |
| JIPC-007 |
STUDY OF P/I & I/P CONVERTER |
