Home >
ROD MILL

ROD MILL

More Views

ROD MILL

Code:

DESCRIPTION:

Rod Mills are horizontal rotating cylindrical steel chamber of half filled with steel rods of length slightly less than the length of chamber. The rods are of different diameter. The size reduction is accomplished by the impact of rods as they fall back after being lifted by the rotating chamber.

Rod Mill is fitted on a sturdy MS frame. Charging of rods and material is done by the means of opening provided in the chamber. The chamber is turning about the horizontal axis through a reduction gearbox drive through a ½ HP motor. The stepped pulley arrangement is done for moving the Rod Mill at three different speeds. A revolution counter is provided to find out the number of turns. Special arrangement is done to free the Rod Mill from reduction gearbox for charging and discharging the material.

EXPERIMENTATION:

To study effect of RPM on the power consumption of a Rod Mill.
To determine the efficiency of a Rod Mill for grinding a material of known WI.

UTILITIES REQUIRED:

Raw Material for Feed.
Electric Supply : Single phase, 220 V AC, 1 kW.
Set of Sieves with Sieve Shaker for analysis.
Floor area 1.5 x 1m

TECHNICAL DETAILS:

Rod Mill	Material MSDia 275mm, Length 350mm. Thickness 5 mm.
Discharge Chute	Suitable size.
Drive	½ HP motor coupled to Reduction Gearbox & 3 step pulley to get 40, 50 and 60 RPM (Approx.)
Revolution Counter	Mechanical type.
Product receiver	Material Stainless Steel of suitable size.
Control panel comprises of
Energy measurement	Electronic Energy meter.
MCB	For overload protection.
With Standard make on/off switch, Mains Indicator etc.
The set-up is fitted with required guards.
An ENGLISH instruction manual will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.


Ordering Details:

Catalogue No	Description
JIMO-005	ROD MILL

Description

Details

DESCRIPTION:

Rod Mills are horizontal rotating cylindrical steel chamber of half filled with steel rods of length slightly less than the length of chamber. The rods are of different diameter. The size reduction is accomplished by the impact of rods as they fall back after being lifted by the rotating chamber.

Rod Mill is fitted on a sturdy MS frame. Charging of rods and material is done by the means of opening provided in the chamber. The chamber is turning about the horizontal axis through a reduction gearbox drive through a ½ HP motor. The stepped pulley arrangement is done for moving the Rod Mill at three different speeds. A revolution counter is provided to find out the number of turns. Special arrangement is done to free the Rod Mill from reduction gearbox for charging and discharging the material.

EXPERIMENTATION:

To study effect of RPM on the power consumption of a Rod Mill.
To determine the efficiency of a Rod Mill for grinding a material of known WI.

UTILITIES REQUIRED:

Raw Material for Feed.
Electric Supply : Single phase, 220 V AC, 1 kW.
Set of Sieves with Sieve Shaker for analysis.
Floor area 1.5 x 1m

TECHNICAL DETAILS:

Rod Mill	Material MSDia 275mm, Length 350mm. Thickness 5 mm.
Discharge Chute	Suitable size.
Drive	½ HP motor coupled to Reduction Gearbox & 3 step pulley to get 40, 50 and 60 RPM (Approx.)
Revolution Counter	Mechanical type.
Product receiver	Material Stainless Steel of suitable size.
Control panel comprises of
Energy measurement	Electronic Energy meter.
MCB	For overload protection.
With Standard make on/off switch, Mains Indicator etc.
The set-up is fitted with required guards.
An ENGLISH instruction manual will be provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.


Ordering Details:

Catalogue No	Description
JIMO-005	ROD MILL

Additional Information

Additional Information

Code	No

Reviews

Be the first to review this product

ROD MILL

More Views

ROD MILL Send Enquire

Details

Additional Information

Information

Contacts

ROD MILL