| CRT |
6"Rectangular screen with internal graphical |
| Display |
CH1, CH2, ADD, ALT & CHOP |
| Deflection Factor |
5mV/div to 5V/div +3%, 1mV/div to 1V/div,+5% (x5), 10 steps |
| Rise Time |
<17.2ns |
| Maximum Input Voltage |
250 (DC + AC peak value)when <1KHz (250V, DC +AC) |
| Input Coupling |
AC, DC & GND |
| Polarity Selection |
+ (CH2 only) |
| Display Mode |
1, 10 & X-Y |
| Time Base |
0.2us/div to 0.2s/div, 9 ranges |
| Sweep Expansion |
x10 |
| Accuracy |
+3% |
| Triggering Mode |
Auto, NORM, TV-V, TV-H |
| Triggering Source |
Int, Line & Ext. |
| AUTO |
20Hz-20MHz |
| NORM |
0.5 div INT, 0.5 Vp-p EXT |
| TV-H |
At least 1 div or 1 Vp-p |
| Input Impedance |
1M ohm |
| X-Y phase difference |
<3 degree, DC-50 KHz |
| Calibration Waveform |
Frequency 1KHz 2%,Voltage 0.5 V 1% |
| Outer Cabinet |
Acrylic, 5mm thick wall |
| Power requirement |
220 VAC +10% , 50 Hz |
| Weight |
8.0Kg Approx. |
| 8x10 division (1div-1cm) |
| Vertical Deflection |
| Horizontal Deflection |
| Trigger System |
| Block Diagram printed on the Top Panel |
| Control Switches and Knobs on the front panel |
| Side Handles Provided to carry the instrument |
| 12 Fault switch is on front panel |
| 10 Test Points provided on top panel only for observations |
| Complete view of CRT section & other control sections |
